Owner`s manual

290
290
Reference
Useful Information
If the following messages appear, check by referring to the cause and action below.
If the Following Messages Appear
Message Cause Action
Common operations
Temperature is too high.
Restart after a few minutes.
The temperature inside the unit is
abnormally high.
Wait until the temperature
decreases.
Temperature is too low.
Restart after a few minutes.
The temperature inside the unit is
abnormally low.
Wait until the temperature
increases.
Program loading is necessary.
Please insert SD card.
The “SD memory card” containing
the update program is not
inserted.
Insert the “SD memory card”
containing the update program.
Unable to read program.
Please check SD card or
program.
Cannot read the “SD memory
card” for some reason.
Check the “SD memory card”.
Installing failed. Failed to install the software. Install again.
No map data found.
Please insert the unit's
dedicated SD card again.
The “SD memory card” containing
the map data is not inserted.
Insert the “SD memory card”
containing the map data.
Unable to read data.
Please check SD card.
Cannot read the “SD memory
card” for some reason.
Check the “SD memory card”.
Unable to read map data.
Please check SD card.
An “SD memory card” other than
the one containing the map data is
inserted.
Insert the “SD memory card”
containing the map data.
Map/application authorisation
failed.
Please check SD card.
Failed to authorise the map or
application.
Check the “SD memory card”.
Please insert a SD card. The “SD memory card” is missing. Insert an “SD memory card”.
In FM radio mode
List is empty Because the station list cannot be
changed.
Stop using the device for a short
time and then try again.