Operation Manual

144
144
Using Radio
Audio Operations
■ Reception of the Traffic
Information when both the TP
and TA are ON
When the AUDIO SOURCE is FM radio
When the TP and TA are set to ON, “TA” is
displayed on the screen. If there is a TP
station that can be used within the AF list, it
will receive that TP station. If TP station
cannot be received, “TA” on the screen will
flash and automatic TP station search will
start. During the selection of the TP station,
“TP SEEK” is displayed on the screen.
If there is no TP station, “NOTHING” is
displayed on the screen, and original FM
broadcast is received.
Once the traffic information starts, the volume
of the radio will be muted automatically, and
received TA information can be listened to.
When the AUDIO SOURCE is other than
FM radio
“TA” is displayed on the screen. If there is a
TP station that can be used within the AF list,
it will receive that TP station. If TP station
cannot be received, “TA” on the screen will
flash and automatic TP station selection will
start. Once the TA information is received,
playback of the current audio will stop, and
switch to traffic information automatically.
The system will switch to traffic information
interrupt mode during the reception of the TA
information.
ATTENTION
When TA information is received, “TA-
INTERRUPT” is displayed, and the system
switches to TA station.
If the current TP station is not broadcasting
the traffic information, or if the signal is
getting weak when the TP or TA is turned
ON, the system will automatically search for
other TP stations broadcasting the traffic
information. When this function is operating,
“EON” is displayed on the screen.
Once the current traffic information
broadcasting is finished, the system will
return to the previous TP station.
When the PTY31 (emergency broadcast) is
received, “ALARM” is displayed on the
screen and PTY31 (emergency broadcast)
will start. When the FM radio is not selected,
all the operations except switching of the
SOURCE and switching of the radio band will
be disabled.
Volume for the TA and PTY31 (emergency
broadcast) can be adjusted.
● Volume level can be adjusted between 0 to
80.
● Adjusted volume level will be
remembered, and TA or PTY31 received
next time will be output with that volume.
EON (Enhanced Other
Network) System
Reception of the
Emergency Broadcast
Audio Guidance Volume
Setting
1
Press the volume switch while
receiving the TA or PTY31.