Operation Manual

143
143
Traffic information can be received manually
or automatically with the TP/TA function.
● Setting is changed as following every time
the is pressed.
● FM radio mode:
TP OFF/TA OFF J TP ON/TA OFF J TP
ON/TA ON J TP OFF/TA OFF J …
● TP ON/TA OFF
● Other than AM/FM radio mode:
TP OFF/TA OFF J TP ON/TA ON J TP
OFF/TA OFF J …
When the TP is ON, or both of the TP and TA
is ON, traffic information can be received as
in the following description.
■ Reception of the Traffic
Information when the TP is ON
When the TP is set to ON, “TP” is displayed
on the screen. If there is a TP station that can
be used within the AF list, it will receive that
TP station. If the TP cannot be received, “TP”
on the screen will flash. In this case, TP
station can be selected by pressing the .
If the reception gets bad after receiving the
TP station, it is possible to select a TP station
with better reception by pressing the .
If there is no TP station, “NOTHING” is
displayed on the screen, and the original FM
broadcast is received.
During the selection of the TP station, “TP
SEEK” is displayed on the screen.
TP (Traffic Program)/TA
(Traffic Announcement)
to Receive the Traffic
Information Setting
1
Press .
Reception of Traffic
Information