OWNER'S MANUAL In-Car Audio Visual Navigation We appreciate your purchase of this main unit. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
The symbols described below are found in this instruction manual as well as on the device itself to insure its proper and safe usage and to prevent injury or damage to property. Make sure you understand the meaning of these symbols before reading the rest of this manual. Precautions for Use The following symbols will precede information useful for preventing damage to the main unit as well as for its smooth operation.
Table of Contents Before Use 1. Safety precautions............................................................ 14 2. Viewing this Document. .................................................. 19 3. About This Receiver ......................................................... 20 Control Names and Operations........................................................................20 Panel buttons .................................................................................................................
Brightness ................................................................................................................. 35 Color balance (only applies to Video screen)............................................................ 35 Color density (only applies to Video screen) ............................................................. 35 ESN (Eclipse Security Network) Setting .........................................................36 ESN setting screen display .......................................
Operation 1. Navigation Overview ........................................................ 49 Navigation Menu................................................................................................49 Navigation Details Setting Screen ...................................................................49 Settings menu ................................................................................................................ 49 Quick Menu ............................................................
Switching to desired scale.............................................................................................. 75 Enabling smart zoom ................................................................................................ 76 Fine-tuning Smart Zoom ........................................................................................... 76 Driving track display ....................................................................................................... 76 Using logs ..........
Setting from History ..........................................................................................99 Setting from Coordinates ................................................................................99 Search Menu ...................................................................................................100 Display route (in accordance with screen) .................................................................. 100 Traffic ......................................................
What to Do When... 1. Display of Connection Status Information .................. 114 Display of Connection Status Information ...................................................114 2. Accuracy and Error ........................................................ 115 About measurement accuracy ......................................................................115 About GPS Satellite Quality and Status .......................................................115 About Errors in Present Location Display ......
Setting low pass filter .................................................................................................. 131 Setting Loudness ...........................................................................................131 Setting Source Volume Control ....................................................................132 Adjusting Sound Quality.................................................................................133 Adjusting sound quality ......................................
REG (Regional) Setting ...................................................................................142 TP (Traffic Program)/TA (Traffic Announcement) to Receive the Traffic Information Setting..........................................................................................143 Reception of Traffic Information ....................................................................143 Reception of the Traffic Information when the TP is ON ..............................................
About MP3/WMA..............................................................................................153 About supported MP3 file standards ............................................................................ 153 About supported WMA file standards .......................................................................... 153 About ID3/WMA tags.................................................................................................... 154 About supported media types.....................
Visual operations 1. Before Using the DVD Player......................................... 164 Advantages of Digital Versatile Disc (DVD) ..................................................164 Multi-Audio Function..................................................................................................... 164 Multi-Angle Function..................................................................................................... 164 Subtitle Display Function............................................
DVD Player Setting ..........................................................................................176 Specifying the Audio Language.................................................................................... 177 Entering the Code ................................................................................................... 177 Specifying the Subtitle Language................................................................................. 178 Entering the Code .......................
About the DivX standards that can be played back...................................................... 193 How to operate portable audio devices 1. Using the iPod® Player................................................... 194 Using the iPod Player......................................................................................194 Listening to the iPod .......................................................................................194 Fast Forward/Rewind .........................................
Others 1. About the Steering Wheel Switches ............................. 207 Manual setting of steering wheel switch functions......................................207 Compatibility with Steering Wheel Switches ................................................209 Reference 1. Necessary Information ................................................... 211 If the Following Messages Appear.................................................................211 When You Think There Is a Malfunction .................
Before Use Safety precautions WARNING ● Do not modify this system for any uses other than that specified herein. Also, do not deviate from the installation procedures described herein. Eclipse will not be held liable for damages including, but not limited to serious injury, death or property damage resulting from installations that enable unintended operation. ● The main unit requires a 12V DC power supply.
● Do not place foreign objects in the disc insertion slot or iPod/USB input terminal. Fire or shocks may result. ● Do not disassemble or alter this main unit. Doing so may result in an accident, fire or shock. ● Do not let water or foreign objects enter the internal parts of this main unit. Doing so may result in smoke, fire or shock. ● Do not use when main unit is malfunctioning (the screen is not lit or no sound comes out). Doing so may result in an accident, fire or shock.
Before Use Safety precautions CAUTION ● Wiring and installing this main unit requires expertise and experience. Professional installation is recommended. Consult with your dealer or a professional installation expert. Incorrect wiring may damage the main unit or interfere with safe operation of the vehicle. ● Use only specified accessory parts. Using other parts may cause damage to the main unit or cause parts to dislodge and fall or fly off the main unit.
● A “CLASS 1 LASER PRODUCT” label is affixed to the top of this unit. ● In accordance with the European Directive 2002/96/EC (for Waste Electric and Electronic Equipment=WEEE), this product, which is labeled with a crossed-out wheeled bin, may not be disposed of with household waste in member states of the EU.
Before Use Safety precautions IMPORTANT ● When there is a lot of vibration – when driving on a bad road for example – the main unit may become inoperable due to it not being able to read data from the disc. ● In cold temperatures, condensation may accumulate on the lens for readings CDs and DVDs immediately after turning ON the heater. Wait approximately 1 hour for the condensation to evaporate and the device will operate normally.
Before Use Viewing this Document. Section title A title is assigned for each section. Item title A number and title is assigned for each item. Operation title A title is assigned for each operation . Detailed operation title A title is assigned for each detailed operation. Operation procedure Describes the operation. Proceed with the operation as per the numerical order. Operation screen A screen showing the operation will appear.
Before Use About This Receiver Control Names and Operations You can operate this receiver by pressing the buttons (panel buttons) or by touching the switches displayed on the screen (touch switches). ■ Panel buttons Press each panel button to operate it. a Phone button Press to make a telephone call. b VOL button Press to adjust volume of audio. Press to display the audio operation screens. c AV button Press to adjust the screen image quality or screen brightness.
■ Touch switch Touch the switches on the screen to operate. IMPORTANT Touch the touch switches with your finger. Operating touch switches with the point of hard objects such as ballpoint pens or mechanical pencils can damage screen. Touch switch About touch switch operations ● Keep touching the touch switch until “beep” is emitted in response. (When guide tone is set to ON.) ● To protect the screen, touch the touch switch lightly with your finger.
Before Use About This Receiver Turning the POWER ON or OFF At ignition, this receiver automatically switches on and displays the Navigation screen*. When the engine is switched off, this receiver switches off. * The Navigation screen displays your present location. The Audio operations screen displays screen of audio source that was playing on last use. ■ Turn on the power The Caution screen is displayed automatically. After selecting a language, touch [ I Agree ] to display the Navigation screen.
Loading/Unloading a Disc When you listen to music, insert a CD into the drive slot. Also, when you play a movie, insert its DVD into the slot. ■ Loading a disc 1 Press 2 Touch DISC . . ● The display will open to reveal insertion slot. IMPORTANT This receiver can play 8cm CDs and 8cm DVDs. To avoid disc problems, insert a disc without using an adapter.
Before Use About This Receiver 3 Insert a disc into the slot. ● The display will close automatically when the disc is inserted. ● Hold a DVD or CD correctly (by inserting your finger in its center hole and by holding the disc edge by another finger), face the disc label side upward, and insert the disc into the slot. ● When you insert a DVD into slot, its movie will be played in the DVD mode. ● When you insert a CD into slot, its music will be played or the MP3/WMA play will start.
1 Press 2 Touch DISC . . ● The disc will be ejected automatically. Adjusting the Display Angle When the screen shines due to ambient sunlight, you can adjust the angle of the display. CAUTION When adjusting its angle, take care not to pinch your fingers. Otherwise you may hurt yourself or the display may fail. IMPORTANT ● Do not load a disc when the display is tilted. If this caution is not observed, this receiver or the disc may be scratched. 3 After removing the disc, touch CLOSE .
Before Use About This Receiver 1 Press 2 Touch or adjustment. ● ● 3 . of the angle : Each touch returns the display from the tilted state by 1 step (5°). (Maximum 7 steps, 35°) : Each touch tilts the display by 1 step (5 °). (Maximum 7 steps, 35°) After adjusting the angle, press ATTENTION ● You can open the display even when it is tilted. When you close the display, it returns to the preset angle.
About Modes of this Receiver The main modes of this receiver are MENU, Navigation, and Audio.
Before Use About This Receiver Starting each Mode ■ About screen display Press the following switches to switch among screens. If DISC is loaded or USB or iPod is connected while the Navigation screen is displayed, the screendisplay will appear. ■ Navigation screen After a short time, the screen display disappears automatically. Press . ■ Audio operations screen Press . (when operating as CD player)*1. (OFF screen)*2 *1 Displayed when audio function is in operation.
Operation Conditions of this Receiver You can or cannot operate this receiver in the following conditions (the ignition key positions). c: Operable; ×: Inoperable Engine switch Function Turns OFF Navigation/ settings and information × ACC c ON, vehicle at rest *1 c Display open ON, vehicle in motion When the vehicle is in motion, some functions become inoperable for × safety reasons*2.
Before Use Main Unit Settings Besides settings for navigation and audio operations, the following settings can be made.
Guide Tone Setting You can set the “beep” sound issued on pressing the panel buttons and touching the touch switches. 1 Press 2 Touch Info . 4 Touch either On or Off (mute) to set the guide tone. ● On completion, touch Done to store the setting and return to the immediately preceding screen. . ATTENTION The guide tone is outputted from all speakers. Color Pattern Setting You can set the color pattern of the screens. 3 31 Touch Setting . 1 Press 2 Touch Info . .
Before Use Main Unit Settings 3 Button Illumination Setting Touch Setting . You can set the button illumination. 4 Touch 1 , 2 , 3 , 4 5 to set the color pattern. 1 Press 2 Touch Info . 3 Touch Setting . . , or ● On completion, touch Done to store the setting and return to the immediately preceding screen.
4 Touch Blue or Red . 3 Touch Setting . 4 Touch Front L or Front R . ● On completion, touch Done to store the setting and return to the immediately preceding screen. Navi Voice Output Setting ● On completion, touch Done to store the setting and return to the immediately preceding screen. Select the Right or Left navigation voice channel. 1 Press 2 Touch Info . . VTR Input Setting Set the video signal. Auto automatically selects NTSC or PAL. 1 33 Press .
Before Use Main Unit Settings 2 Screen Adjustment and Setting Touch Info . To make it easier to view the screen, switch between Day and Night based on whether the lights (sidelights, tail lights, license plate light) are on or off. In some vehicles, this receiver may be unable to detect whether lights are on or off. In this is the case, manually switch between Day and Night. 3 Touch Setting .
■ Picture quality adjustment You can adjust the day picture and night picture independently. ● For the Video screen. ■ Switching between night picture and day picture. ● For the Navigation screen and Audio screen. 1 When night picture is displayed, touch Day . ● On each touch, the display switches between the night picture and the day picture. ATTENTION When the power is switched on, the panel buttons are constantly lit. ● For the Video screen.
Before Use Main Unit Settings ESN (Eclipse Security Network) Setting This receiver has a built-in ESN (ECLIPSE Security Network function. ESN is a security system which renders the navigation and audio functions inoperable when the battery terminal is disconnected and reconnected. ■ ESN setting screen display 1 Press 2 Touch Info . 3 Touch ESN . . You can make the security indicator flash when the security system is in operation.
■ Operation of ESN security When ESN security is in operation, the navigation and audio functions of this receiver become inoperable when it is disconnected and subsequently reconnected to the battery terminal of the vehicle. 1 Go to the ESN setting screen, load a music CD into the disc insertion slot. ● For disc insertion, see “Loading/Unloading a Disc” on page 23. 2 Touch Setup . ATTENTION The registered music CD is required when unlocking the security.
Before Use Main Unit Settings ATTENTION ● If the music CD cannot be verified, you can make a maximum of five attempts to unlock the security. When verification fails, the Customer enquiries screen is displayed. ● When the Customer enquiries screen is displayed, you can no longer operate this receiver. Please contact customer services. ■ Setting display indicator of security You can select whether to use the security indicator which flashes when ESN security is in operation.
Before Use Bluetooth Hands-Free Operation Using Bluetooth HandsFree This receiver uses Bluetooth wireless technology to enable use of Bluetoothsupported cell phones. Connection with this receiver allows you to make calls without touching your cell phone. To use a Bluetoothsupporting cell phone with this device, it is necessary to perform Bluetooth registration and connection settings. ■ Hands-free screen display 1 Press . ● The hands-free screen is displayed.
Before Use Bluetooth Hands-Free Operation Registering from a cell phone 1 Touch Pairing on the Hands-free screen. 4 “Bluetooth Connection Successful” is displayed on completion of registration. ● Registration of the cell phone is now complete. Register by searching for cell phone on this receiver 2 1 Touch Pairing on the Hands-free screen. 2 Touch Device Search . Touch Allow Connect . ● “Searching...” is displayed. 3 On the cell-phone, enter PIN CODE for this receiver.
3 Select the device name of the cell phone you wish to register ■ Deleting cell phone registration Delete a cell phone registered on this receiver. 1 Touch Select on the Hands-free screen. 2 Select the cell-phone for deletion 3 Touch Delete . 4 “Bluetooth Connection Successful” is displayed on completion of deletion. ● Search screen 4 Enter the PIN CODE on the cell phone. ● The default PIN CODE setting is 1234. ● Perform the cell phone operations with the Device information screen displayed.
Before Use Bluetooth Hands-Free Operation ■ Connecting a cell phone Connect a cell phone registered on this receiver. 1 Touch Select on the Hands-free screen. ATTENTION ● When connection fails, “Bluetooth Connection Failed” is displayed. In this case, repeat the connection operations. ● Note that you cannot connect unregistered cell phones. ■ Cancelling connection. 2 a cell phone 1 Touch Select on the Hands-free screen. 2 Select the cell phone for which to cancel connection.
ATTENTION If the vehicle's battery is disconnected (for repairs to the vehicle or for removing this unit), all the Registered cell-phone, phone book and all call history in the memory will be lost. In such a case, redistilling cell-phone in the memory again. 2 On completion, touch . ● A call is made to the entered number. ■ Making a call IMPORTANT Do not make a call while driving. Be sure to park the vehicle in a safe location and make a call.
Before Use Bluetooth Hands-Free Operation 3 Select name or telephone number to call from history. ● Touch or to see other names or telephone numbers. 4 Touch . ● Makes a call to the selected telephone number from the history. 2 Select person (name or telephone number) to call. ● Touch or to see other names or numbers. Touch ABC , DEF , GHI , JKL , MNO , PQRS , TUV , WXYZ , or 0-9 to display names starting with the corresponding letters or telephone numbers starting with the corresponding numbers.
■ Receiving a call You can receive incoming calls in any source mode. When a call arrives, the Calling screen is displayed automatically. 1 ATTENTION Refused calls are stored in the incoming call history. ■ Adjusting the ringtone volume When you hear the ringtone, touch . ● You are connected and able to talk. . CHECK Make adjustments to the ringtone during ringing. 1 ● Adjust the volume by pressing .
Before Use Bluetooth Hands-Free Operation ■ Hands-free settings You can perform settings for hands-free operation on the Phone setting screen. 1 Touch Setting on the Hands-free screen. Auto Answer settings Start talking five seconds after arrival of incoming call. 1 Touch On or Off . Ringtone settings For setting to emit the cell-phone ringtones. 1 Touch On or Off . Auto Connect settings 2 On the Phone setting screen, you can perform the following settings using the settings switches.
Starting Out About GPS Navigation Before Using the GPS Navigation ■ Simple mode mode and Advanced The two operating modes of Navigation mainly differ in the menu structure and the number of available features. The controls and screen layouts are the same. ● Simple mode: You have easy access to the most important navigation functions and the basic settings only. The rest of the settings are set to values that are optimal for typical use.
Starting Out About GPS Navigation Type Example Virtual f keyboard Type Example Description How to use Touch switch a Touch to initiate a function, to open a new screen, or to set a parameter. Only one touch is required. Icon b Shows status information. Some icons also function as switches. Only one touch is required. List c When you need to select from several options, they appear in a list. Move between pages by touching the switches of c.
Operation Navigation Overview Navigation Menu This is the Navigation menu. From here, you can access the following screens. Touch the following switch on map screen: [Menu] Screen Touch switch Description Map [Map] The Map screen. Find [Find] Select destination (for example an address or a POI) or use the search engine of Navigation for any other reason (for example to look for the phone number of a POI).
Operation Navigation Overview Description Reference [Map Screen] Touch switch You can fine-tune the appearance and content of the Map screen. 53 [Route Planning] These settings determine how routes will be calculated. 54 [Navigation] You can control how Navigation behaves during navigation. 56 [Sound] You can adjust the voices of Navigation.
■ Quick Menu The Quick menu is a selection of controls that are frequently needed during navigation. It is opened from the Map screen. Touch the following switches on the map: Touch the switch in the Quick menu to start the Map screen immediately. Switches are on when lit up. Name Main function (single touch) Function (touch and hold) 3D buildings can be displayed on the map. Use this switch to suppress them temporarily. Opens 3D settings. Turn Track Logs on and off.
Operation Navigation Overview ■ Route menu Save, load and edit your routes. Touch the following switches: [Menu], [Route] Touch switch Description Reference [Route Info] Opens a screen with useful route data. 86 [Itinerary] You can browse the driving instructions that Navigation follows during navigation. You can exclude maneuvers or streets to adjust the route to your preferences. 85 [Edit Route] Modify routes: Delete route points or modify their order.
■ User data management You can manage settings implemented for saved data (Pins, POI, Favorites, History, and Track Logs) and programs. Touch the following switches :[Menu], [Manage], [User Data Management] Touch switch Description [Remove Pins] You can add Pins to locations on the map using the [Place Pin] switch from the Cursor menu(See page 64). Touch this switch to remove all Pins from the map. [Back Up User Data] All user data and the current settings will be saved on the inserted memory card.
Operation Navigation Overview Touch switch [Street Names During Navigation] Description Street names and POI icons can get in the way on the map during navigation. With this switch you can suppress these map elements when Navigation is following your position on the map. If you move the map, both the street names and POI icons reappear immediately. [Lane Information] Some maps contain lane information to help you position your car in the upcoming intersection.
Road Types Used for Route Planning: Type Description [Unpaved Roads] Navigation excludes unpaved roads by default: Unpaved roads can be in a bad condition and usually you cannot reach the speed limit on them. [Motorways] You might need to avoid motorways when you are driving a slow car or you are towing another vehicle. [Ferries] Navigation includes ferries in a planned route by default. However, the map does not necessarily contain information about the accessibility of temporary ferries.
Operation Navigation Overview ■ Navigation settings You can control how Navigation behaves during navigation. Touch the following switches: [Menu], [Settings], [Navigation] Touch switch [Keep Position on Road] Description This feature allows car drivers to always correct GPS position errors by matching the vehicle position to the road network. By turning off this feature, you also turn off the GPS position error filtering.
Touch switch Description [Units] You can set the distance units to be used by the program. Navigation may not support all the listed units in some voice guidance languages. If you select a measurement unit not supported by the chosen voice guidance language, a warning message will appear. [Set Date & Time Format] You can set the data and time format. A variety of international formats are available. [Time and Time Zone Settings] You can access time and time zone settings.
Operation Navigation Overview Touch switch [Speed Camera Warning] Description This feature allows you to receive a warning when approaching a Road Safety Camera. You must ensure on your own liability that using this feature is legal in the country where you intend to use it. The options are as follows: ● Audible Warning: Plays back buzzer sound as you approach a camera. You can also limit the warning to playing when you are over the speed limit on approach.
■ TMC settings You can check connecting information of TMC. Touch the following switches: [Menu], [Settings], [Traffic INFO] ■ Safety Mode settings This feature is available in Advanced mode only. Touch the following switches: [Menu], [Settings], [Warnings], [Safety Mode] ■ Trip information screen The Trip information screen has both route and travel data you might need during your journey. It can be opened directly from the Map screen by touching the Trip Data field.
Operation Navigation Overview Name Description Function Speedometer Shows the current speed both graphically and as a number. Touch this field to show it on the Map screen in one of the Trip Data fields. Distance Remaining Shows distance remaining to final destination. Touch this field to show it on the Map screen in one of the Trip Data fields. Time Remaining Shows the time needed to reach the final destination of the route based on information available for the remaining segments of the route.
Symbol Description This value is not shown on the Map screen. This value appears on the Map screen in the Trip Data area. This is the value at the top. This value appears on the Map screen in the Trip Data area. This is the value in the middle. This value appears on the Map screen in the Trip Data area. This is the value at the bottom. ■ Trip computer screen The Trip computer screen provides collected trip data. Touch [Trip Computer] on the Trip information screen to open the Trip computer screen.
Operation Navigation Overview ATTENTION If the vehicle's battery is disconnected (for repairs to the vehicle or for removing this unit), all the Trip Computer history (Average Speed, Total time, etc) in the memory will be lost. Screen Adjustment and Setting ■ Day screen and night screen This unit uses different color profiles during the day and during the night. ● Daytime colors are similar to those of paper road maps.
Map Display ■ Present location display Access from the Navigation menu by touching [MAP]. For further information about the Map screen, see “Map screen” on page 79. Navigation displays the route as follows. Symbol Name Description Current GPS position Your present position displayed on the map. Cursor (selected map position) The location selected in the Find menu, or a map point selected by touching the map. Start point The first point of the route.
Operation Navigation Overview Symbol Name Description Route color The route stands out against the map, both in daytime and night color modes. The active leg of the route is always displayed in a brighter shade than the inactive (upcoming) legs. Active leg of the route The section of the route on which you are driving. If no via points have been added (destination only), the entire route becomes the active leg.
Touch switch Description [Info] Opens a new screen showing the address of the Cursor and nearby POIs. [More Options] Opens the full-screen Cursor menu with all the available options. [Set as Destination] Creates a new route with the Cursor as the destination. The previous route (if one exists) is deleted. [Remove Destination] When the cursor is at the destination or nearby, this switch replaces the previous switch, and the present location disappears from the route.
Operation Navigation Overview ■ Position menu When you follow the recommended route on the map (the Cursor is the current GPS position), the Position menu replaces the Cursor menu. It does not contain switches that modify the current route, as the GPS position is not useful as a route point. To open Position, touch [Position]. ■ Checking vicinity information ● If you are interested in the details of your present position during navigation: 1 Check the bottom line of the map.
■ Map menu operations Position marks on map ● Current GPS position: (See page 63) ● Selected location (Cursor): (See page 64) The following controls help you modify the map view to best suit your actual needs. Most of these controls appear with a single touch of the map, and disappear after a few seconds of inactivity.
Operation Navigation Overview Action Rotating left and right Touch switch Description Changes the horizontal view angle of the map in 3D mode. When GPS position is available, Navigation always rotates the map so its top faces your direction of travel (Track-Up orientation). You can turn away from Track-Up with these switches. If GPS position is available and you have rotated the map, the switch appears. Touch this switch to re-enable the automatic map rotation.
Action Touch switch Zoom preset Description Touch the preset switch once to set the zoom level to a fixed predetermined value. Smart Zoom is disabled. These switches are available in 2D mode. (Advanced mode only) Touch and hold the desired switch to set the zoom value as the current zoom level, or reset to an original value. Tilt and Zoom preset Touch the preset switch once to set the zoom level to a fixed predetermined value. Smart Zoom is disabled. These switches are available in 3D mode.
Operation Navigation Overview Icon Information Details If the icon is a static picture, route calculation is needed. GPS position and an active route are available, but automatic off-route recalculation is switched off, and you deviated from the route. Touch this area to make Navigation recalculate the recommended route. This icon indicates that route calculation is in progress. Navigation is calculating or recalculating the route. Nothing happens if you touch this area of the screen.
Icon Information Details Action Indicator strip ● Track Log recording Nothing happens if you touch this area of the screen. ● TMC status The following symbols appear in the Indicator strip: Navigation records a Track log when GPS position is available. Track log recording is disabled. TMC is turned off. A TMC Traffic data is received. There are new, unread Traffic events. A part of the route is bypassed based on Traffic events.
Operation Navigation Overview Icon Description Turn sharp left. , Keep left. , Continue straight in the intersection. , Enter traffic circle. The number of the exit is shown in the circle, but only for the next turn. , Enter freeway. , Exit freeway. , Board ferry. , Leave ferry. , Approaching the next via point. , Approaching the destination. , The following information is displayed in three fields displayed on the Map screen.
Icon Type Distance information More information There are distance type values that can be shown. ● Distance remaining to destination ● Distance remaining to next via point ● Current altitude GPS reception quality shows the current accuracy of the position information. Icon Description GPS receiver not connected. GPS navigation is not possible. Navigation is connected to the GPS receiver, but the signal is too weak and the receiver cannot determine the GPS position. GPS navigation is not possible.
Operation Navigation Overview Touch switch Action [Place Pin] Marks the map with a Pin at the Cursor (available in Advanced mode only). [Routing Methods] Shows the different routes calculated by the available routing methods. Choose the one that best suits your needs (available in Advanced mode only). [Set as Start] On an active route, use the Cursor as the start point by resetting the current GPS position (available in Advanced mode only).
■ Position determination (Cursor) If you select a location in the Find menu, or you touch the map when the map control switches are visible, the Cursor appears at the selected point on the map. Navigation displays the Cursor with a radiating red dot ( ) to make it visible at all zoom levels, even when it is in the background of a 3D map view. When the Cursor is set, touch [Cursor].
Operation Navigation Overview Enabling smart zoom Touch the map to make the map control switches appear, and then touch Zoom. to enable Smart Fine-tuning Smart Zoom Touch the map to make the map control switches appear, and then touch and hold to open the Smart Zoom settings window. Modify the zoom limits of Smart Zoom as necessary. ■ Driving track display This unit can log the track that you drive.
Recording the travelled path (creating a Track Log) 1 Start driving. 2 Touch the following switches: [Menu], [Settings], [Track Logs] 3 Start recording: Touch [Record]. ● You can return to the map and continue driving. 4 Repeat the above steps, then touch [Stop Recording] to stop the recording. ● Navigation labels the Track Log with a time stamp. (As an alternative, you can touch in the Quick menu to start, and then again to stop the Track Log recording.
Operation Navigation Overview Changing the color of a Track Log 1 Touch the following switches: [Menu], [Settings], [Track Logs] 2 Touch the desired Track Log and then touch one of the color switches. ■ Saving route This feature is available in Advanced mode only. The procedure is explained starting from the Map screen. 1 Touch the following switches: [Menu], [Route], [Save Route] 2 Enter a name for the saved route, and then touch [Done].
■ Loading saved route This feature is available in Advanced mode only. The procedure is explained starting from the Map screen. 1 Touch the following switches: [Menu], [Route], [Load Route] 2 Touch the route you wish to navigate. 3 In the very likely case that the start position of the saved route is different from the current GPS position, you need to confirm whether you want to stop navigating from the current GPS position to use the start point of the loaded route.
Operation Navigation Overview 12 13 15 17 9 21 11 16 8 7 19 14 10 80 80
20 During navigation, the screen shows route information and trip data (left screens), but when you tap the map, additional switches and controls appear for a few seconds (right screenshot). Most parts of the screen behave as switches. Symbol Name Action 1 Main information. Ex) Next route event. Opens the Route Information screen. 2 Second upcoming route event Opens the Itinerary. 3 Trip information screen Opens the Trip information screen.
Operation Navigation Overview Symbol Name Action 14 Return to GPS position (appears when GPS position is available and you have moved the map) Touch this switch to move the map back to the current GPS position. If the map has been rotated in 3D mode, automatic map rotation is also re-enabled. 15 Enable Smart Zoom (replaces the Previous Touch this switch once to enable Smart Zoom. switch when there is no GPS position or the map has not been moved).
■ About roads Navigation shows the streets in a in a similar way to paper road maps. Their width and colors correspond to their importance. You can easily tell a freeway from a small street. CHECK If you prefer not to see street names during navigation, turn them off (See page 53).
Operation Navigation Overview Touch switch/icon Description This POI group is not shown on the map. This POI group and all its subgroups are shown on the map. This POI group and some of its subgroups are shown on the map. This POI group contains POIs that you saved. When a POI group is open for editing: Touch switch Description [Off] Items in the POI group will not be shown on the map.
■ Itinerary display The Itinerary is a list of the route events, which are the driving instructions. On the Map screen you can display itineraries by the following methods. ● Touch the area between the Turn preview field where the next maneuver is shown and the Travel data field.
Operation Navigation Overview ■ Route editing This feature is available in Advanced mode only. Touch the following switches: [Menu], [Route], [Edit Route] A list of route points appears with the start point at the top of the list and the final destination at the bottom. If several via points exist, you might need to scroll between pages. Touch one of the route points in the list.
Touch any of the fields to see data on the via points starting from the first one through the final destination. This screen includes following data and features: Description Function Route Line Name The upper part of this screen shows your planned route as a horizontal line. The point at the left end represents the route starting point and the point at the right end represents the final destination.
Operation Navigation Overview ■ Facility information, storage, and revision A point of interest (POI) is a location that someone might find useful or interesting. Navigation comes with several thousand POIs included. You can create POIs independently in the application. POI locations are marked on the map with special icons. POI icons are quite large so you can easily recognize the symbol. The icons are semi-transparent. They do not hide the streets and intersections behind them.
Using Keyboard Screen You only need to enter letters or numbers in Navigation when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example ABC, QWERTY, or numerical. Task Description Switching to another keyboard layout, for example from an English QWERTY keyboard to a Greek character keyboard Touch [US ENGLISH (QWERTY)] to select it from the list of available keyboard types.
Navigation Guidance Navigation Guidance You can set up your route in Navigation in several ways: ● if you need a simple route (a route with only one destination and without any intermediate via points), you can select the destination and start navigating to it right away. ● You can plan a multi-point route (available in Advanced mode only).
Setting from Address If you know at least a part of the address, this is the quickest way to select the destination of the route. Using the same screen, you can find an address by entering: ● The exact number address, including 1 Touch the following switches: [Find Address] (Advanced mode) 2 By default, Navigation proposes the country and city where you currently are. If needed, touch the switch with the name of the country on it, and select a different one from the list.
Navigation Guidance Navigation Guidance 7 Select the street from the list. 8 Touch []. ● Enter the house number on the keyboard. 9 Touch [Done] to finish entering the address. 10 The map appears with the selected point in the middle. From the Cursor menu, touch [Set as Destination] (Advanced mode). The route is then automatically calculated, and you can start navigating.
6 Touch []. ● Start entering the street name on the keyboard. ● After entering a couple of characters, the names that match the string appear in a list. ● Touch [Done] to open a list of results before one appears automatically. 7 Select the street from the list. 8 Touch []. ● Enter the house number on the keyboard. 9 Touch [Done] to finish entering the address. 10 A list appears with the matching addresses. Touch the desired one.
Navigation Guidance Navigation Guidance 6 Touch []. ■ Selecting from intersection ● Start entering the street name on the keyboard. 1 Touch the following switches: [Find], [Find Address] (Advanced mode). ● After entering a couple of characters, the names that match the string appear in a list. 2 By default, Navigation proposes the country and city where you are. If needed, touch the switch with the name of the country, and select a different one from the list.
6 Touch []. ● Start entering the street name on the keyboard. ● After entering a couple of characters, the names that match the string appear in a list. ● Touch [Done] to open a list of results before one appears automatically. 7 Select the street from the list. 8 Touch [Intersection]. ● If only a few intersecting streets exist, a list of them appears immediately. ● For longer streets, a keyboard screen appears. Start entering the name of the intersecting street on the keyboard.
Navigation Guidance Navigation Guidance 6 7 Touch [City Centre]. The map appears with the selected point in the middle. From the Cursor menu, touch [Set as Destination] (Advanced mode). The route is then automatically calculated, and you can start navigating. ■ Selecting from Postcode All of the above address searching possibilities can be performed when entering the Postcode instead of the city name. The following is an example for a full address.
Setting from Favorites ■ Entering quick address ● When you are entering the name of a city or a street, Navigation only displays those characters that appear in possible search results. The other characters are grayed out. ● To enter a city or street name, enter a few letters and then touch [Done]. Navigation will display a list including the entered letters. You can select a location that you have already saved as a Favorite to be your destination.
Navigation Guidance Navigation Guidance 2 Select the area in which to search for the POI. ● [Around Address]: The POI will searched for around a given address. be ● [Around Cursor]: The map appears with the Cursor in the middle. Modify the location of the Cursor if necessary, then touch [OK]. The POI will be searched for around the given location. ● [Around GPS Position]: The POI will be searched for around the current GPS position.
■ Select from saved facility information search criteria 4 Your can save POI search criteria in the POI section of the Manage menu. However, Navigation also comes with a number or presaved criteria which can be used immediately to search for POIs. 1 Touch the following switches: [Find], [Find POI] (Advanced mode). 2 Touch [Saved Search Criteria]. 3 Select one of the saved criteria, and a list of matching POIs appears. 4 5 Touch the desired POI in the list.
Navigation Guidance Navigation Guidance Search Menu Select the route destination. Touch the following switches: [Menu], [Find] Touch switch Description Referen ce [Find Address] If you know at least a part of the address, this is the quickest way to find the location. 91 You can select your destination from the thousands of POIs included with Navigation or from the ones you have previously created. 97 The destinations that you have already entered in Navigation are available in the History list.
Route Search and Advanced Search Navigation calculates the route based on your preferences. Route calculation methods ● Fast ● Short ● Economical ● Easy Road types ■ Creating multiple destinations (adding intermediate points) A multi-point route is created from a simple route. Hence, the route must be non-active at first. One of the ways of expanding the route is to keep the destination, and to add via points (intermediate destinations). This feature is available in Advanced mode only.
Navigation Guidance Navigation Guidance You have the following options: Touch switch Action The selected point moves up in the list (becomes a via point to be reached earlier). Repeatedly touching this switch will make this point the start point. The selected point moves down in the list (becomes a via point to be reached later). Repeatedly touching this switch will make this point the final destination.
■ Deleting an intermediate point from the route The simplest way to delete the next route point (next via point) is to touch the Turn Preview field ( ) of the Map screen, then touch [Skip Next Via] to open the Route information screen. In Advanced mode, you have another option. Touch the following switches: [Menu], [Route], [Route Info], [Skip Next Via]. ■ Detour menu This screen contains quick detour possibilities during navigation. You can touch [Detour] directly from the Map screen.
Navigation Guidance Navigation Guidance ■ Managing saved routes You can manage previously saved routes. Touch the following switches: [Menu], [Manage], [Saved Routes] Touch switch When Track Log details are shown: Touch switch Touch this switch to hide the Track Log on the map. No color will be assigned to the Track Log. Description Switch with Opens the selected route for name of saved editing. route Touch one of the colored switches to assign a color to the Track Log.
Demonstration (Demo) A simulation drives you through the route, following the driving instructions. You can choose between a simulation at high speed or at normal driving speed. For example, using route demonstration, you can check the bridges planned by Navigation. You can then avoid any bridges you do not wish to cross. ■ Viewing a route demonstration This feature is available in Advanced mode only. The procedure is explained starting from the Map screen.
Navigation Guidance Storing Locations Managing Favorites You can manage the list of your Favorites. Touch the following switches: [Menu], [Manage], [Favourites] Touch switch Switch with name of Favorite Description Opens the selected Favorite for editing. Deletes the selected item from the list of Favorites. [Clear All] Clears the list of Favorites. Turns the page for view other items on the list.
Navigation Guidance What to Do When... About GPS Satellite Quality and Status Touch status. and the GPS switch to open the GPS Data screen and check the GPS reception Icon Color Green 107 Description Navigation is connected to the GPS receiver and able to obtain GPS position information in 3D. Navigation can calculate both your horizontal and vertical GPS position. Yellow Navigation is connected to the GPS receiver and able to obtain GPS position information in 2D.
Navigation Guidance What to Do When... Icon Color Name Description n/a Coordinates Your current GPS position in WGS84 format. n/a Status bars for the satellites Dark bars are for the yellow and lit bars are for the green satellites. The more satellites your GPS tracks (the green ones), the better is your calculated position. About Speed Warnings Maps may contain information about the speed limits of the road segments. This information may not be available in your district (ask your local dealer).
■ Camera warning The warning for Road Safety Cameras can be turned on in Warning Settings. Touch the following switches: [Menu], [Settings], [Warnings], [Speed Camera Warning] When you approach a Road Safety Camera with the warning enabled, the following happens. ● Visible Warning: The type of the camera is displayed in the secondary Turn Preview field (for example ).
Navigation Guidance What to Do When... Symbol Type Section control Description These speed cameras work in pairs, and do not measure your current speed but your average speed between the two speed cameras. Both identify your car and record the exact time you pass them. They use the difference between the two points in time to calculate your average speed. Navigation warns you when you approach these speed cameras in the measured direction.
Optional Features Rear View Camera Operations If the separately sold rear view camera is installed, you can play the rearward status on the display on shifting into the back gear. CAUTION The rear view camera plays a mirror-reversed video image to give the same view as a rear or side mirror. The way to view the image differs depending on vehicle model. Be careful when using it. IMPORTANT When using a high-pressure car-wash machine, take care not to directly turn the nozzles on or around the camera.
Optional Features Rear View Camera Operations ● When you change to back gear, the screen will turn white and then the image will quickly return to the screen. ● If the camera unit is exposed to strong light such as sunlight or headlights, a vertically-oriented white zone may appear. ● If the camera is used for a long period of time, white scratches or vertical lines appear as the temperature rises. Note that these phenomena are caused by the CCD characteristics.
ATTENTION ● The image range displayed on the screen may vary depending on vehicle or road surface conditions. ● The image range displayed on the screen is limited; therefore, you cannot display something that is located near both ends of the bumper or under the bumper. ● Colors shown in the rearward image may be different from the actual colors of the objects. ● You can adjust the brightness and contrast of the screen.
What to Do When... Display of Connection Status Information You can check connection status information for the connections between this receiver and the vehicle. These connections include those for GPS information and parking signals. Display of Connection Status Information 1 2 Press Item GPS information . Parking signal Touch Info . Content ON GPS information being received. OFF GPS information not being received. ON Parking brake is on. OFF Parking brake is off.
What to Do When... Accuracy and Error About measurement accuracy GPS satellites are managed by the US Department of Defense and have a very high accuracy. However, when multipath effects are caused by reflections from buildings and the like, errors may occur. About GPS Satellite Quality and Status When there is obstruction between the GPS antenna and the GPS satellites, signals cannot be received.
What to Do When... Accuracy and Error About Errors in Present Location Display Since this receiver uses information from the GPS satellite signals to establish the present location, and the measurements from each of these include some error, the displayed present location may not match your actual position. CHECK When the displayed present location does not match your actual position, you can revise it. Stop somewhere safe, before revising.
The present location appears on a When turning on a road forking When making a turn, the present road running parallel to the road into two roads making a "Y" shape, location appears on the road just taken. the present location appears on before or after the road turned on. the other road. The present location appears misaligned when driving on steep roads. The present location appears misaligned when driving on a continuous curve in the same direction.
What to Do When... Accuracy and Error About Road and Place-Name Data There is always a possibility that roads and place-names will be modified after creation of the map data, in which case the provided names will differ from the actual names. About Route Guidance When having turned on an intersection that is not part of the route guidance, there may be an error in the voice guidance instructions. When searching for a route, the route provided may include a detour.
When searching for a route, the route display may not appear in time for the next turn. While providing guidance on where you are headed, several geographical names may be indicated. Drive following the actual traffic regulations. ● When you are driving at high speed, it may take longer to perform the search. ● Your route may not change even if you initiate another search.
Starting Out Before Use CAUTION ● Be very careful and pay full attention to safety when operating the audio controls while driving. Otherwise accidents may occur. Also, be sure to set the volume so that you can still adequately hear sounds outside the vehicle. Improper use may result in a traffic accident. ● Never continue to use the system if it is malfunctioning in any way. If smoke, abnormal noises or abnormal odors are noticed, turn off the power immediately.
● Do not insert any objects other than discs into the disc slot. Damage could result. ● Be careful not to get your fingers or other objects caught behind the monitor when it is being retracted into place. Interference can cause an injury or damage the main unit. ● When removing a disc or “SD memory card” from this receiver, remove it horizontally. Do not pull up or press down forcibly while removing. Improper removal may result in the disc becoming scratched, causing the receiver to emit unusual noises.
Starting Out Before Use About Discs ATTENTION ● In cold or rainy weather, just as the interior glass surface becomes fogged, dew (water condensation) may also settle on the receiver. When this occurs, disc playback may become intermittent or impossible. Dehumidify the air in the vehicle for a while before resuming playback. ● If a problem occurs, the player function stops automatically to protect its internal parts.
● Do not use a CD and a See Through disc having a transparent or semi-transparent recording area as they may fail to load or unload or play their contents. ● A Copy Control CD (CCCD) may not be played as it does not meet the official CD Standard. ■ Handling discs ● Do not place a disc in direct sunlight; store each disc in their protective cases. Otherwise, discs may warp and fail to play. ● Do not apply paper-based tape to either the recording side or label side of a disc. Damage could result.
Starting Out Before Use ■ Brand new CDs ● You may notice that some brand new discs are rough around the center hole or outside. In this case, remove burrs or flakes around the edge using the side of a ballpoint pen before using a new disc. Not doing so may result in burrs or flakes becoming stuck on the recording side, preventing playback. Rough edges Ballpoint pen Rough edges ■ Rental discs ● Do not use a rental disc with glue or remnants of adhesive tape or labels.
Operation Switching Audio Source Switching the Audio Source 1 Press 2 Select the Audio mode you wish to use. . Stopping audio mode 1 Press 2 Touch Audio Off . . ● Touch Audio Off again to receive the station you were receiving, the music you were playing or the video you were playing when you stopped the radio. Display of Audio Operations Screen 1 125 Press .
Operation Source Operations Screen The Source operations screen appears as follows.
● iPod screen (optional) ● USB screen ATTENTION Operation screen will be cancelled automatically when no operation is performed for 6 seconds in the visual operation screens) DVD, DivX, iPod Video, and VTR.
Operation Volume Control Main Volume Control 1 ● Press the VOL switch. (Right-hand side) Increases volume (Left-hand side): Decreases volume ● Press for at least one second will continue to increase the volume. Press for at least one second will continue to decrease the volume. aVolume switch ATTENTION ● Adjust the volume level that does not affect on your safety driving. ● You can control the volume level from 0 to 80. ● The actual sound level may vary when you have switched the audio source.
Operation Adjusting sound quality You can set the sound quality and adjust the sound balance and the like. Display of Audio Settings Screen When you switch to the Audio settings screen from any of the Audio operations screens, the following operations are available. ● Adjusting audio balance Adjusting audio balance You can adjust the forward and back, and left and right balance. 1 Touch BAL/FAD Setting . 2 Touch the desired balance point.
Operation Adjusting sound quality Sub-Woofer Settings You can adjust the audio output when a subwoofer is connected. ■ Setting sub-woofer level You can adjust the sub-woofer output level. 1 Touch Woofer Setting . ■ Switching the phase The sound outputted from the sub-woofer includes the same frequency bands as the sound from the front/rear speakers, and cancellation can occur under some in-vehicle conditions. Switch the phase of the subwoofer to prevent this phenomenon.
■ Setting low pass filter The low pass filter cuts out frequencies higher than the set frequency (high-band frequencies) and allows lower frequencies (low-band frequencies) to pass. 1 Touch ON or OFF . ● After completing the setting, touch Done to store the setting and return to the immediately preceding screen. Setting Loudness You can correct for the lack of satisfaction at high and low frequencies when listening at low volume to give better modulated sound. 1 Touch Loudness on the Settings screen.
Operation Adjusting sound quality Setting Source Volume Control You can set a volume difference for each audio mode. The differences between the volume of the FM mode in the initial state (initial value: 40), which is used as reference, and the volume levels set for each audio mode are stored. 1 On the Audio settings screen, touch the or . ● After completing the setting, touch Done to store the setting and return to the immediately preceding screen.
Adjusting Sound Quality You can adjust sound quality in the low band, the medium band and the high band. ■ Adjusting sound quality 1 Touch EQ Setting . 3 Touch or . ● When you touch and hold, the value changes continuously but stops at the center value. Touch or again to continue to change the value. ● It is also possible to adjust to preferred level by touching the screen. ● The maximum adjustment is +6 and the minimum adjustment is -6.
Operation Adjusting sound quality ■ Use a preset sound quality 1 2 Touch EQ Setting . Touch Power (Low-band enhancement), Sharp (High-band enhancement), Vocal (Mid-band enhancement), or Custom (User preset value). ● To reset the sound quality, touch Flat .
Operation Screen Settings Switching Between Screen Modes The picture is shown with a 3 (vertical) by 4 (horizontal) aspect ratio (normal TV screen proportions) and black side edges. CHECK You can switch the screen mode from DivX, DVD, iPod Videos, or VTR settings screen. 1 Opens Video settings screen. ● The Video settings screen can be set up to show the following operations. DivX: Touch Set on the operation screen. DVD: Touch Next on the Operations screen, and then touch Set on the screen that opens.
Other operations About Remote Control Remote Control Operations ■ Precautions for use ● The remote control is small and light, so care must be taken when using it. Dropping it or knocking it against something may cause it to break, start to consume batteries faster, or malfunction. ● Keep the remote control away from humidity. Do not spill water or other liquids on it. Do not strike the remote control. ■ About cleaning ● When the remote control is dirty, wipe with a dry cloth.
Number Name/Function [dPRESET CH u] button [d DISC u] button f 2 Set the two batteries in the battery compartment as indicated. 3 Close the battery case by pushing the rear panel in the direction of the arrow. Performs an operation for selection of the preset channel, for the disc, USB or iPod. [MODE] button g Switches among audio source modes. [DISC] button h i Switches among DISC, USB and iPod. [AUX] button Switch between VTR and BT Audio [.
Audio Operations Using Radio Using Radio Tune a Desired Station CAUTION If the vehicle's battery is disconnected (for repairs to the vehicle or for removing the main unit), all the stations held in the memory will be lost. In such a case, set stations in the memory again. IMPORTANT a Preset switch b TUNE UP/DOWN button c MENU button d AUTO.
Selecting Radio Band ■ Auto Tuning 1 Press second. or and hold for at least 1 ● When a station having the frequency closest to the one shown on the screen is tuned, the auto tuning stops. To cancel auto tuning, press the button again. 1 Touch Band . ● Each touch of Band switches to next receiver band. FM1 J FM2 J FM3 J FM1 J … ATTENTION Auto tuning may fail if the received signal is weak. ■ Selecting from preset switch 1 Touch a preset switch stored in memory.
Audio Operations Using Radio 2 Touch and hold the preset switch for at least 1 second. ● The selected station will be saved, and the preset channel number and frequency will be shown on the display. ● To manually set additional selected stations for the remaining preset channels, repeat this procedure for each channel. ● Six stations can be memorized for each of FM 1, 2 and 3, and six stations can be memorized for AM, making a total of 24 stations.
Displaying text information You can display text information during broadcasts. 1 Touch TEXT . 2 Touch Preset to return to the Radio operations screen. Using RDS (Radio Data System) RDS (Radio Data System) can receive traffic information via FM radio. User can continuously listen to the same program by automatically searching a broadcasting station with good reception when the reception gets bad.
Audio Operations Using Radio AF (Alternative Frequency) Setting When the AF function is ON, frequency will be switched automatically to the one with the best reception of the broadcasting station currently being listened to. AF function is set to ON as a default. Depending on the location, there are stations broadcasting different programs at different frequencies. 1 Touch AF . ● When the AF function is ON: AF display is lit.
TP (Traffic Program)/TA (Traffic Announcement) to Receive the Traffic Information Setting Traffic information can be received manually or automatically with the TP/TA function. 1 Press . ● Setting is changed as following every time the is pressed. ● FM radio mode: TP OFF/TA OFF J TP ON/TA OFF J TP ON/TA ON J TP OFF/TA OFF J … Reception of Traffic Information When the TP is ON, or both of the TP and TA is ON, traffic information can be received as in the following description.
Audio Operations Using Radio ■ Reception of the Traffic Information when both the TP and TA are ON When the AUDIO SOURCE is FM radio When the TP and TA are set to ON, “TA” is displayed on the screen. If there is a TP station that can be used within the AF list, it will receive that TP station. If TP station cannot be received, “TA” on the screen will flash and automatic TP station search will start. During the selection of the TP station, “TP SEEK” is displayed on the screen.
PTY (Program Type) Setting With the RDS stations, the name of the broadcast program service (PS) and program type information (PTY) is broadcasted and displayed. 1 Touch PTY . 2 Touch the genre to listen to. ● Touch to return to the immediately preceding screen. 3 Touch Search . ● Search starts for a broadcasting station broadcasting a program that matches the selected PTY.
Audio Operations Using CD Player Using CD Player 1 Press 2 Touch DISC . . ● The disc starts to play. a Track UP/DOWN, Fast UP/DOWN button b MENU button c Scan switch d Random switch e AV button f Repeat switch Listening to CD ATTENTION ● If track titles and other data are recorded in the CD-Text format, you can display them. ● Note that the CD-Text of a CD-R/RW disc may not be displayed. Selecting Track to Listen to Insert a CD into the disc slot, and it will start playing.
Fast Forwarding/ Rewinding You can fast forward or rewind the track currently being played. 1 Press second. or and hold for at least 1 ● To the right: Fast forwards a track. Repeating Same Track 1 Touch Repeat . ● The track repeats. ● When you touch Repeat , the track repeats until this function is cancelled. Touch Repeat again to cancel the repeat play. To the left: Rewinds a track. Fast-forwards (rewinds) until finger is removed from switch. Finding Desired Track 1 Random Play Touch Scan .
Audio Operations Using MP3/WMA Player Using MP3/WMA Player Playing MP3/WMA File When you insert a CD-R/RW disc containing an MP3/WMA file into disc slot, the file is played. CAUTION ● Do not press the [e(OPEN/EJECT)] button when you are inserting a CD into disc slot. This may cause a personal injury or damage the front panel. ● Do not drive your vehicle while the front panel is open. The panel may cause personal injury in the case of a sudden stop or similar event.
1 With a CD-R/RW inserted, press . 2 Touch DISC . Selecting desired folder You can select a desired folder from the disc. ■ Selecting from folder list ● The disc starts to play. ● The usual playing order is J J J . (See page 154) J J 1 Touch List . 2 Touch Play . ● If multiple MP3/WMA files and folders are located in the same hierarchy, they are played in the ascending order of file name and folder name. ● If you try to create a non-MP3/WMA format file, “NO SUPPORT” warning is displayed.
Audio Operations Using MP3/WMA Player ■ Select from linked folders 1 ● Press or . : Goes to previous folder and plays the first track in this folder. : Goes to folder one level higher and plays the first track of this folder. ATTENTION If no MP3 files exist in the folder, “NO DATA” will appear in the section where the file name and folder name are displayed. Selecting Desired Music File You can select a desired music file from the folder. ■ Selecting from file name switch 1 150 150 Touch List .
Finding Desired Music File ■ Select from linked files 1 Press or . IMPORTANT ● Right: Advances to the next file. Left (Press once.): Returns beginning of the playing file. to the Left (Press twice or more.): Returns to previous files. Fast Forward/Rewind You can fast forward or rewind the track that is currently playing. 1 Hold down seconds. or for 1 or more ● To the right: Fast forwards a track. To the left: Rewinds a track. Fast-forwards (rewinds) until finger is removed from switch.
Audio Operations Using MP3/WMA Player Repeating Music File Random Play IMPORTANT IMPORTANT When you have selected any of scan, folder scan, repeat, folder repeat, random or folder random, a corresponding message of Scan, F.Scan, Repeat, F.Repeat, Random or F.Random will appear to allow you to confirm the selected function. 1 Touch Repeat for repeat. Touch and hold for at least 1 second for folder repeat. ● Repeat: Repeats the current file. Folder repeat: Repeats files of the current folder.
About MP3/WMA MP3 (MPEG Audio Layer 3) is a standard format for audio compression. By using MP3, a file can be compressed to one-tenth the size of the original. WMA (Windows Media™ Audio) is the Microsoft's voice compression technology. WMA files can be compressed to a size smaller than MP3 files. This receiver only accepts certain MP3/WMA file standards, recorded media and formats. Use the following notes when you write MP3/WMA files on a disc.
Audio Operations Using MP3/WMA Player ■ About ID3/WMA tags In MP3/WMA files, you can enter textual attribute information known as ID3 tag/WMA tags and save information such as track titles and artist names. This receiver supports ID3v.1.0 and ID3v.1.1 tags. This receiver supports the ISO 8859-1 codes only. Use only the ISO-8859-1 codes to record tags. If characters not included in ISO8859-1 codes are recorded, they may not be readably displayed. This receiver supports the WMA tag ASF revision (v1.20.02).
● Maximum number of characters for folder and file names: 30 characters (including delimiter “.” and 3 characters of file extension) for MP3, but 15 characters (including delimiter “.” and 3 characters of file extension) for WMA.
Audio Operations Using MP3/WMA Player ■ Multi-sessions Multi-sessions are supported and CD-R/RW with recorded MP3/WMA files can be played. When written with Track at once, however, finalize the disc with session close or write protect. ■ About playing MP3/WMA When you load a disc with MP3/WMA files, the system first checks all files recorded on the disc. If the disc has many files and folders, the system may take a certain time to check them.
■ Converting music CD into MP3/WMA files Prepare a PC and a commercially available MP3/WMA encoder (conversion) software (some of them are free). Load a music CD on the PC's CD-ROM drive and compress the music CD by following the procedure of MP3/WMA encoder software. MP3/WMA-format music data files are created. A 12 cm music CD (having a maximum of 74 minutes of recording/650 MB of data) can be compressed to 65 MB (about 1/10 of the original size).
Audio Operations Using USB Music File Player Using USB Music File Player This receiver can play music files stored in a USB memory. Only MP3/WMA playback is available. Playing USB Music Files CAUTION Connect the USB cable correctly so that it does not interfere with safe operation of the vehicle. IMPORTANT When a USB memory device is attached, the receiver may take time to scan and read the file tag information.
Selecting Desired Folder You can select a desired folder from the USB memory. ■ Selecting from folder list 1 Touch List . ■ Select from linked folders 1 ● Press or . : Goes to folder one level higher and plays the first track in this folder. : Goes to folder on level lower and plays the first track in this folder. ATTENTION 2 Touch Play . ● Plays first track in folder. If no MP3 files exist in the folder, “NO DATA” will appear in the section where the file name and folder name are displayed.
Audio Operations Using USB Music File Player Selecting Desired Music File 3 Touch the file you wish to play. You can select a track you want to play. ● This plays the selected music file. ■ Selecting from file name switch ● When the following screen is displayed, touch or to change between items. 1 2 Touch List . ● Touch to return to the immediately preceding screen. ■ Select from linked files Select the folder you wish to use.
Fast Forward/Rewind You can fast forward/rewind the track currently being played. 1 Hold down seconds. or for 1 or more ● To the right: Fast forwards a track. 1 Touch Scan to perform a scan. Touch and hold for at least 1 second to perform a folder scan. ● Scan: Plays first 10 seconds of every file in the same folder layer as the file being played. Folder scan: Plays the first 10 seconds of the first file of each folder. To the left: Rewinds a track.
Audio Operations Using USB Music File Player Random Play of Music Files 1 It will perform Random playback by touching Random , and F Random playback by touching it for over 1 second. ● F Random playback: Plays files of all folders in random order. Random playback: Plays files of currently playing folder in random order. ● Touch Random to continue the random play until you cancel it. Touch Random again to cancel the random play. ● If you touch Repeat during random play, the current track is repeated.
■ Format of USB memory The following explains the definitions of these standards. ● Maximum number of directory layers: 8 layers ● Maximum number of characters for file names: Up to 254 characters (Total of folder name, file name, “.”, and 3-character file extension) ● File name characters that you can use: A to Z, 0 to 9, and underscore (_) (Range of alpha-numeric ISO-8859-1) ● Max number of files that can be stored in a single memory: 3000 files 001.mp3 002.mp3 003.mp3 004.txt 005.mp3 1498.
Visual operations Before Using the DVD Player This receiver can play high quality images and high quality digital sound of DVD videos. Also, you can select any of languages (such as dubbing and subtitles) recorded on the DVD by switching the video and audio channels. If the same scene is recorded in different angles, you can select an angle and play the video in the desired angle.
Discs ■ Types of Playable Discs This equipment conforms to PAL color television methods, so please use discs that display “PAL” on the disc or package. This equipment cannot play discs using color television methods other than PAL (such as NTSC, SECAM). Type and mark of playable disc Size/playing side Max. playing time 12cm/1 side 1 layers 133 min. 2 layers 242 min. 12cm/2 sides 1 layers 266 min. 2 layers 484 min.
Visual operations Before Using the DVD Player ■ Mark Indicated on Disc The following table shows the marks that are indicated on DVDs or packages. Mark Meaning Indicates the number of audio tracks. Indicates the number of subtitles. Indicates the number of angles. Indicates the image aspect ratio (ratio between the height and width of the TV screen) able to be selected. ● “16:9” indicates a wide screen, and “4:3” indicates a standard screen.
Products equipped with Macrovision This receiver is equipped with copyright protection technology that is protected under U.S.A. patents and other intellectual property rights, which are held by Macrovision Corporation or other rights holders. Using the copyright protection technology requires the permission of Macrovision Corporation, and the technology must be used only in general households and other limited viewing environments, except when expressly permitted by Macrovision Corporation.
Visual operations Using the DVD Player Using the DVD Player Watching a DVD Video Insert a DVD into the disc slot, and it will start playing. IMPORTANT To ensure driving safety, you cannot watch a video while driving. 1 Press 2 Touch DISC . . CHECK You can watch a video on a DVD only when you have stopped your vehicle and applied the parking brake for safety reasons while the engine switch or ACC is turned on.
Video Operations IMPORTANT ● The touch switches and other operation icons are shown approximately 6 seconds. Touching the screen will display them again. ● Depending on the disc, automatic playback may not function, or playback may not function unless a menu recorded on the disc is selected.(See page 170) Fast Forwarding or Rewinding Using Touch Switches 1 Hold down seconds. or for 1 or more ● It will fast forward (rewind) the video until the switch is released. ■ Playing a Video 1 Touch .
Visual operations Using the DVD Player ■ Stopping a Video 1 Touch 3 Touch select the play-back menu. 4 Touch Enter . . Disc Menu Operations You can operate the menu recorded on the disc. 1 , and Touch Next . ATTENTION ● Display menu by touching Top Menu . Menu or ● The recorded menu items vary depending on the disc. This machine plays what is recorded on the inserted disc; therefore, functions may not operate as intend.
■ Finding by Title Number ■ Finding by chapter number 1 Touch Search . 1 Touch Next . 2 Touch − , ＋ , −10 , or ＋10 , and enter the title number. 2 Touch 3 Touch Number . . ● If you touch − or ＋ , the title number is decremented or incremented by 1. ● If you touch −10 or ＋10 , the title number is decremented or incremented by 10. 3 171 Touch Enter .
Visual operations Using the DVD Player 4 Touch − , ＋ , −10 , or ＋10 , and enter the menu number. ● If you touch − or ＋ , the menu number is decremented or incremented by 1. ■ Relocating Display the 1 Touch Next . 2 Touch 3 Touch Position . Touch Switch ● If you touch −10 or ＋10 , the menu number is decremented or incremented by 10. 5 . Touch Enter . Changing the Touch Switch Display You can change or hide the touch switch display while playing. ■ Hiding the Touch Switch 1 Touch Off .
Changing the Screen Display and Audio Mode You can change the subtitle language, audio language, or display angle of a video to be played. 3 Touch Change angle . ● Each time you touch Change angle , the angle number is changed, and the angles recorded on the disc are toggled in sequence. ■ Changing the Angle If the target disc supports multiple angles, you can change them to display a video. CHECK While the multi-angle mark is displayed on the screen, you can change the currently displayed angle.
Visual operations Using the DVD Player 2 Touch Subtitle . ■ Changing the Audio Language If the target disc supports multiple audio languages, you can change them while playing. IMPORTANT ● Depending on the disc, it may only be possible to change audio languages from the top menu. 3 Touch Change subtitle . ● Each time you touch Change subtitle , the subtitle number is changed, and the subtitle languages recorded on the disc are toggled in sequence.
3 Touch Change audio . 3 Touch Wide . 4 Touch Normal , Wide1 or Wide2 . ● Each time you touch Change audio , the audio number is changed, and the audio languages recorded on the disc are toggled in sequence. Switching DVD setting display 1 Touch Next . ● Normal The screen is shown with the 3 (vertical) by 4 (horizontal) aspect ratio (normal TV screen size) and side edges are black.
Visual operations Using the DVD Player DVD Player Setting You can pre-specify the play-back audio mode or the language used to display subtitles or menus. You can also configure settings to display or hide the multi-angle mark or specify the parental screening level. 1 4 If you touch each touch switch, you can configure the following setting. Touch Next . Touch switch 2 3 176 176 Function Page Audio Language Specifies the audio language of a video to be played.
■ Specifying the Audio Language You can watch the play-back video in the desired language. 1 Touch Audio Language on the initial setting screen. 2 Touch the desired language. Entering the Code 1 Touch Other on the preferential audio language setting screen. 2 Enter the desired language code. ● For the language code, see “Language Code List” on page 182. ● If you touch Other , you can specify a language other than the one displayed on the screen. 3 Touch Done . ● Touch 3 Touch Done .
Visual operations Using the DVD Player ■ Specifying the Subtitle Language You can view the play-back video in the desired subtitle. 1 Touch Sub Title on the initial setting screen. 2 Touch the desired language. Entering the Code 1 Touch Other on the preferential subtitle language setting screen. 2 Enter the desired language code. ● For the language code, see “Language Code List” on page 182. ● If you touch Other , you can specify a language other than the one displayed on the screen.
■ Specifying the Menu Language You can specify the language to display menus recorded on the disc. 1 Touch Menu Language on the initial setting screen. 2 Touch the desired language. Entering the Code 1 Touch Other on the menu language setting screen. 2 Enter the desired language code. ● For the language code, see “Language Code List” on page 182. ● If you touch Other , you can specify a language other than the one displayed on the screen. 3 Touch Done . ● Touch 3 Touch Done .
Visual operations Using the DVD Player ■ Setting display of multi-angle mark You can configure to display or hide the multiangle mark during the playback. 1 2 Touch the number digit by digit to enter the code number. ● If the code number is omitted, “----” is displayed in the upper field. Touch Angle Indicator on the initial setting screen. ● On each touch, On and Off switches. 2 Touch Done .
ATTENTION ● The code number is necessary. If a number is not entered, setting of viewer restriction will not be possible. ● Once a code number is specified, you must enter it when using this item next time and after. Be careful not to forget the code number. If you forget the code number, touch Clear 10 times while the code number field remains blank; you can initialize (clear) the current code number. ● Parental screening levels are classified into the following three types.
Visual operations Using the DVD Player Language Code List These codes are used to specify the language for audio tracks, subtitles and on-screen menu displays.
Visual operations Using the VTR Using the VTR You can watch a video by connecting a commercially available VTR. You cannot, however, connect the iPod cable (video line) and VTR together. IMPORTANT To ensure driving safety, you cannot watch a video while driving. CHECK You can watch a video only when you have stopped your vehicle and applied the parking brake to secure safety while the engine switch or ACC is turned on.
Visual operations Using the VTR Changing the VTR Setting Screen 1 Touch Wide . 2 Touch Normal , Wide1 or Wide2 . ● Normal The screen is shown with the 3 (vertical) by 4 (horizontal) aspect ratio (normal TV screen size) and side edges are black. ● Wide1 The screen with the 9 (vertical) by 16 (horizontal) aspect ratio (normal TV screen size) is uniformly expanded in the left and right directions.
Visual operations Using the DivX Player Using the DivX Player IMPORTANT To ensure driving safety, you cannot watch a video while driving. ■ About DivX ● DivX is a highly recognized media technology developed by DivX, Inc. DivX media files enable you to compress with a high compression ratio while maintaining high image quality. Menus, sub titles, and sub audio tracks can be included in the file compressed by DivX. DivX.com has a variety of DivX media files.
Visual operations Using the DivX Player Playing the DivX Insert a disc containing a DivX file into the disc slot, and it will start playing. 1 Press 2 Touch DISC . . ■ Fast Forward/Rewind It is possible to fast forward or rewind through the file being played. 1 Hold down seconds. or for 1 or more ● To the right: Fast forwards a video. To the left: ● The disc starts to play. Rewinds a video. ● If the operation switches (touch switches) are not being displayed, touch the screen.
Select the folder to view ■ Select from continuous folder You can select a desired folder from the disc. 1 ■ Select from the folder list ● 1 Touch List . 2 Touch Play . or . : Goes to the next higher folder and plays the first video of this folder. : Goes to the next lower folder and plays the first video of this folder. ATTENTION ● Playback the video at the start of the folder. ● Page will switch by touching if there is next page.
Visual operations Using the DivX Player 2 Fast Forward/Rewind Touch on the folder to view. ● Page will switch by touching if there is next page. You can fast forward or rewind the currently playing video. or ● Touch to return to the immediately preceding screen. 1 Hold down seconds. or for 1 or more ● To the right: Fast forwards a video. To the left: Rewinds a video. It will fast forward (rewind) the video until the switch is released. 3 Repeating a video file Touch on the file to view.
Random Play IMPORTANT When you select repeat or random, its function is shown as Repeat or Random on the display. 1 Touch Random . Changing the Subtitle Language If the target disc supports multiple subtitle languages, you can change them to display a video. 1 Touch Set . 2 Touch Subtitle . ● Plays files of currently playing folder in random order. ● When you touch Random , the random play continues until you cancel it. When you touch Random again, the random play is cancelled.
Visual operations Using the DivX Player 3 Touch Change Subtitle . ● Each time you touch Change Subtitle , the subtitle number is changed, and the subtitle languages recorded on the disc are toggled in sequence. 2 ● Touch to return to the immediately preceding screen. 3 Changing the Audio Language If the target disc supports multiple audio languages, you can change them while playing. 1 190 190 Touch Set . Touch Audio . Touch Change Audio .
Display DivX VOD code To play the DivX VOD (Video On Demand) contents, register this unit to the contents provider first. This DivX VOD registration code is required at that time. 3 Touch DivX VOD . ● DivX® Video On Demand registration code is displayed. DivX® Video On Demand registration code can be displayed. 1 Press 2 Touch Info . 191 . ● It will return to previous screen by touching the .
Visual operations Using the DivX Player Caution display while playing VOD Rental file A message is displayed on the screen when DivX VOD Rental files are played. Read the contents displayed, and touch either [Yes] or [No]. Switching the Video Output 1 Touch Set . 3 Touch Normal , Wide1 or Wide2 . ● Normal The screen is shown with the 3 (vertical) by 4 (horizontal) aspect ratio (normal TV screen size) and side edges are black.
About DivX ● Codec support: DivX 3.x, 4.x, 5.x, 6.x ■ About the DivX standards that can be played back ● Profile: Home Theater *2 Format of Discs ● Maximum resolution: 720×480 (30fps), 720×576 (25fps) ● CD-ROM formats: CD-ROM Mode 1, CD-ROM XA Mode 2 (Form 1) ● Supported audio codec: MP3, AC3, MPEG, LPCM *1 ● File formats: ISO9660 Level 1 or Level 2 (for both CD and DVD) Only title 1 can be played back in DivX media format. Menu is not displayed.
How to operate portable audio devices Using the iPod® Player Using the iPod Player Once an iPod is connected, you can play iPod music or video files. Using this receiver, you can perform operations, for example, selecting a file from the list or changing to the random playback mode. You cannot, however, connect the iPod cable (video line) together with USB or VTR. IMPORTANT ● For details on the iPod functions, refer to the iPod operation manual.
1 Press 2 Touch iPod . Selecting the Desired Music or Video File . You can select a desired song or video. 1 ● Playback will begin. Press or . ● To the right: Advances to the next file. To the left: Returns to the beginning of the file being played. Left (Press more than two times): Returns to the previous file. Fast Forward/Rewind The selected song or the video (file) will be played. You can fast forward or rewind the track or the video currently being played. 1 Hold down seconds.
How to operate portable audio devices Using the iPod® Player 2 To select a track or program to play, touch Playlists , Artists , Albums , Podcasts , or Genres . ● This displays the list screen of the selected mode. ● Touch to return to the immediately preceding screen. 4 Touch the name of the music file to be played. ● This plays the selected music file. ● When or appears, touch them to change the page of the music file list. ● You cannot operate the and switches when your car is running.
Setting to the iPod Video Mode You can select and play a desired video file from the iPod memory. CAUTION ● If the iPod is disconnected from this receiver while playing a video file on the iPod, you will return to the previously selected mode. 3 Touch on the category to view. ● Touch Menu and the menu screen is displayed. ● Page will switch by touching if there is next page. or ● Touch to return to the immediately preceding screen.
How to operate portable audio devices Using the iPod® Player 5 Repeatedly Playing the Same Music File Touch on the video file to view. ● This plays the selected video file. ● Page will switch by touching if there is next page. or 1 Touch Repeat . ● Touch Menu and the menu screen is displayed. ● This repeatedly plays the currently played music file. ● Touch to return to the immediately preceding screen.
Random Play of Music Files ■ Listen randomly from the list that is playing 1 Touch Shuffle . ● All the files will playback randomly from the playlist. ● Once you touch Shuffle , the random play continues until you cancel it. Touch Shuffle again to cancel the random playback of all files in the playlist. 199 ■ Listen to an album randomly The selected album can be played back randomly. However, the music files in the album will be played back in order from the beginning. 1 Touch Album Shuffle .
How to operate portable audio devices Using the iPod® Player ■ Listen all music files random All music files can be played back randomly. 1 Touch Shuffle All . ● Once you touch Shuffle All , the random play continues until you cancel it. Touch Shuffle All again to cancel the random play. ATTENTION When the iPod is taken off with the unit set to Shuffle All, setting of the iPod will be changed to shuffle playback.
How to operate portable audio devices Using Bluetooth Audio Using Bluetooth Audio A Bluetooth compatible portable audio player (“portable device” hereafter) can be used as a source for this unit by utilizing the Bluetooth wireless communication technology. To use a Bluetooth compatible portable device with this unit, it is necessary to perform Bluetooth registration and connection settings.
How to operate portable audio devices Using Bluetooth Audio 4 5 Touch Allow Connect . Register by searching for a portable device on this receiver 1 Press 2 Touch Bluetooth Audio . 3 Touch Pairing . 4 Touch Device Search . . On the portable device, enter PIN CODE for this receiver. ● The default PIN CODE setting is 1234. ● Perform the portable device operations with the Device information screen displayed.
5 Select the device name of the portable device you wish to register ■ Connection device of the portable Connect a portable device registered on this receiver. 6 1 Press 2 Touch Bluetooth Audio . 3 Touch Connect . 4 “Bluetooth Connection Successful” is displayed on completion of connection. . Enter the PIN CODE on the portable device. ● The default PIN CODE setting is 1234. ● Perform the portable device operations with the Device information screen displayed.
How to operate portable audio devices Using Bluetooth Audio ■ Cancelling a connection. portable 1 Press 2 Touch Bluetooth Audio . device ■ Listening to the portable device . a Random switch b File UP/DOWN, Fast UP/DOWN button c Repeat switch d MENU button e Play switch 3 4 Touch Disconnect . g Stop switch “Bluetooth Connection Successful” is displayed on completion of cancellation. ● Cancelling of the connection of the portable device is now complete.
3 Touch ■ Selecting a Desired Music . ● Start the playback of the connected portable device. 1 Press or . ● Right: Advances to the next music. Left (pressing once): Returns to the beginning of the music being played. Left (pressing more than two times): Returns to the previous music. ■ Fast forward / rewind ATTENTION If the playback does not start by touching the of this unit, press the playback button on the portable device. 1 Press longer.
How to operate portable audio devices Using Bluetooth Audio ■ Random Play 1 Touch Random . ● All titles of the Bluetooth Audio are played in random order. ● When you touch Random , the random play continues until you cancel it. When you touch Random again, the random play is cancelled.
Others About the Steering Wheel Switches On vehicles equipped with steering wheel switches, these easy-access switches can be used to perform the main audio and other operations. ● For details of the steering wheel switch, please contact your local dealer. ● This function may not be available depending on the vehicle type. Manual setting of steering wheel switch functions You can manually assign the desired functions to every steering wheel switch buttons.
Others About the Steering Wheel Switches 6 Touch the command you wish to set. 9 Touch Finalize . 10 Touch Done after confirming the final confirmation screen. ● Next page is displayed by touching or . 7 While pressing the steering switch button to record, touch the Store until a beep sounds. ● Touch to return to the immediately preceding screen. ● It will display Completed when the setting is completed, then it will return to Command Select screen and displays Store on the set command.
Compatibility with Steering Wheel Switches The table below shows the compatibility between the steering wheel switches and this receiver. (Switches other than (u) and (d) are available for VTR operation.) Operation Common operations Switch (+) Name Volume switch (–) (MODE) Mode selection switch Function Explanation of operation Each momentary actuation of these switches changes the volume one step. Hold a switch down for a continuous volume change.
Others About the Steering Wheel Switches Operation USB operations Switch (u) (d) Name Track selection switches Function ● Selects the next track or previous track or beginning of the current track. ● Fast forward or rewind Operation of iPod and BT-Audio (u) (d) Track selection switches ● Selects the next track or previous track or beginning of the current track.
Reference Necessary Information If the Following Messages Appear If the following messages appear, check the status again, referring to the cause and action. Message Cause Action In CD/MP3 WMA/DVD mode No DISC DISC is not inserted. Insert the DISC. The loaded disc is dirty or upside down. Check it for proper orientation and verify it is clean. Check DISC Disc is dirty or damaged. Clean the disc if it is dirty. Insert the disc correctly if it is upsidedown. Do not use the scratched or warped disc.
Reference Necessary Information Message Cause Action Resolution error This file exceeds the resolution allowed by the HOME THEATER profile. This is a DivX file recorded with resolution other than DivX HOME THEATER profile, so it cannot play. Eject the DISC. View DivX(R) VOD Rental This rental has ** views left. Do you want to use one of your ** views now? Display the remaining playback count of the file Follow the directions on the screen. Viewing count has expired Eject the DISC.
When You Think There Is a Malfunction A slight difference in operation may be mistaken for a malfunction. Please check the items in the following table first. If the unit does not work, even after the appropriate remedial action has been taken, please contact your dealer. Condition Possible cause Action The screen is dark for a brief period when the power is turned on at low temperatures. This is a characteristic of TFTs. This is not a malfunction. Wait for a brief period.
Reference Necessary Information Condition Neither video nor audio is output. There is a point of light on the display. Possible cause Action The vehicle ignition switch has not been turned on. Turn the vehicle ignition switch to [ACC] or [ON]. The connection wires and cables are not completely connected. Check the connections to each connection wire and cable. At least 99.99% of the pixels on the TFT panel are effective, but it is possible that 0.01% of the pixels may not light or may stay lighted.
Reference Glossary Please read the descriptions for following terms to enjoy more. ● GPS (Global Positioning System) GPS is a system to detect current location (latitude, longitude, altitude) by receiving radiowaves from normally 4 or more, or 3 in some cases, GPS satellites orbiting 21,000 km over the Earth. These satellites are launched and managed by the US Department of Defense mainly for military use, but are also open for private usage.
Reference Specifications Dimensions 34 (W) × 13.2 (H) × 38 (D) mm Weight approx. 25 g (Excluding cables and connectors) Power supply voltage 4.5 +/-0.5(V) Power consumption 10 to 30 (mA) Usage temperature -30 to 80 (°C) Storage temperature -40 to 100 (°C) Liquid crystal panel 7.0″ QVGA Screen dimensions 156.24 (W) × 82.21 (H) mm Pixel count 391,680 pixels (480 (H) × 272 (V) × 3) Active pixel rate Over 99.
USB Interface 1.1/2.0 (support) Frequency Response 20Hz to 20,000Hz ±3dB S/N Ratio (A-weighted) 75 dB Compatible Bluetooth Ver.2.0 Compatible Profile HFP (Hands Free Profile) Ver.1.5 OPP (Object Push Profile) Ver.1.1 A2DP (Advanced Audio Distribution Profile) Ver. 1.0 AVRCP (Audio/Video Remote Control Profile) Ver.1.0 Rated output 15 W × 4 (1 kHz, 1% 4 Ω) (EIAJ) Maximum output 50 W × 4 (test voltage 14.
