Instruction manual

Screen Operations after Turning
Power ON
When the engine is turned ON, the DVD/audio
power will automatically turn
ON and the
Caution screen will appear. After the selection
of the language, touch
[I Agree] to switch to the
Navigation screen. The power will turn OFF
when turning off the engine.
8ATTENTION
• Press [NAVI] if the navigation screen does not
appear.
• Press [MENU] and then touch [AUDIO OFF] if the
audio or
DVD does not turn ON.
Setting the Navigation Operation
Mode
The main unit provides a choice of operation
modes ("Simple mode" and "Advanced mode"),
each providing different menus
and settings.
The navigation operations
and map-screen
layout are the same
in each mode. This
document describes the basic navigation
operations available from "Simple mode." See
the ECLIPSE web manual for advanced
navigation operations ("Advanced mode").
When the power of the main unit
is turned on for
the first time, the screen switches
in the order
shown below.
• "Simple mode" or "Advanced mode" can be
switched later.
• The features and settings available
in each
mode are as follows:
CD Available in Simple mode
® Available in Advanced mode
Type of action
CD
®
Navigating to a selected map point Yes
Yes
Navigating to a street address
Yes Yes
Navigating to an
incomplete
Yes
Yes
address
Navigating to an intersection
Yes Yes
Navigating to recent destinations
Yes Yes
(History)
Navigating to Favorites
Yes
Yes
Navigating to a POI
Yes Yes
Navigating to coordinates
No
Yes
Creating a multi-point route
No
Yes
Saving a map point as a Favorite
Yes Yes
destination
Saving a map point as a POI No
Yes
Saving a map point as a location of
No
Yes
a Road Safety Camera
Mark a map point with a Pin No
Yes
Saving the active route
No
Yes
Saving Track Logs
No
Yes
Map Screen settings
No
Yes
Menu settings
Yes'1
Yes
Sound settings
Yes'2
Yes
Route Planning options
Yes
Yes
Regional settings
Yes'3
Yes
Warnings
No
Yes
*1: Only background picture
*2: Only Master volume
*3: Only language selection