User manual

7
4
13-24
16
5
13-24
17
6
13-24
18
7
13-24
19
8
13-24
20
9
13-24
21
A
13-24
22
B
13-24
23
C
13-24
24
The formula for calculating DMX channels is as follows:
DMX channel = Dowser channel + Power Supply starting channel -1
Example: DMX channel (221) = color changer channel (20) + power supply
starting channel (202) -1
Note: Eclipse II Dowsers can only be addressed to the first 24 channels of the 48
channel block displayed on the power supply.
Note: The Dowsers will not respond to the DMX signal until you exit the DMX channel
selection (SETUP) menu.
LED and DIP Switch Functions
The function of the LEDs and the DIP switch on the Eclipse II Dowsers are as follows:
LED Indicates DIP Switch # Function
-------------------------------------------- -----------------------------------------------------------------
Yellow
Local Control
1
DMX or Local control
Red
Reserved
2
Snap mode ON / OFF
Red
Low Voltage
(<22v)
3
Channel Range 1-12 or
13-24
Green
Power
4
Fast Mode or Smooth
Mode
All
Flashing
Shutdown