Specifications

February 2015 IS29GL_128S_01GS_00_Rev.A GL-S MirrorBit
®
Family 95
Data Sheet
11.2.3 Physical Diagram – LAA064
3354 \ 16-038.12d
PACKAGE LAA 064
JEDEC N/A
13.00 mm x 11.00 mm
PACKAGE
SYMBOL MIN NOM MAX NOTE
A --- --- 1.40 PROFILE HEIGHT
A1 0.40 --- --- STANDOFF
A2 0.60 --- --- BODY THICKNESS
D13.00 BSC. BODY SIZE
E 11.00 BSC. BODY SIZE
D1 7.00 BSC. MATRIX FOOTPRINT
E1 7.00 BSC. MATRIX FOOTPRINT
MD 8 MATRIX SIZE D DIRECTION
ME 8 MATRIX SIZE E DIRECTION
N 64 BALL COUNT
φb 0.50 0.60 0.70 BALL DIAMETER
eD 1.00 BSC. BALL PITCH - D DIRECTION
eE 1.00 BSC. BALL PITCH - E DIRECTION
SD / SE 0.50 BSC. SOLDER BALL PLACEMENT
NONE DEPOPULATED SOLDER BALLS
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-1994.
2. ALL DIMENSIONS ARE IN MILLIMETERS.
3. BALL POSITION DESIGNATION PER JESD 95-1, SPP-010 (EXCEPT
AS NOTED).
4. e REPRESENTS THE SOLDER BALL GRID PITCH.
5. SYMBOL "MD" IS THE BALL ROW MATRIX SIZE IN THE
"D" DIRECTION.
SYMBOL "ME" IS THE BALL COLUMN MATRIX SIZE IN THE
"E" DIRECTION.
N IS THE TOTAL NUMBER OF SOLDER BALLS.
6 DIMENSION "b" IS MEASURED AT THE MAXIMUM BALL
DIAMETER IN A PLANE PARALLEL TO DATUM C.
7 SD AND SE ARE MEASURED WITH RESPECT TO DATUMS
A AND B AND DEFINE THE POSITION OF THE CENTER
SOLDER BALL IN THE OUTER ROW.
WHEN THERE IS AN ODD NUMBER OF SOLDER BALLS IN
THE OUTER ROW PARALLEL TO THE D OR E DIMENSION,
RESPECTIVELY, SD OR SE = 0.000.
WHEN THERE IS AN EVEN NUMBER OF SOLDER BALLS IN
THE OUTER ROW, SD OR SE = e/2
8. NOT USED.
9. "+" INDICATES THE THEORETICAL CENTER OF DEPOPULATED
BALLS.