Owner's Manual Thank you for purchasing the 508PA speaker/amplifier. Please read this Owner's Manual before use. Be particularly sure to read the Safety Instructions section. Keep this Owner's Manual together with the Warranty in a safe place for later reference.
ENGLISH Foreword ■Contents Important safety Instructions ………………………………………………………………………3 Notes on Use ………………………………………………………………………………………6 Part Names and Functions/Connections …………………………………………………………7 Specifications ………………………………………………………………………………………9 ■Accessories ①8 cm dia. speaker x2 〔3 3/20"〕 ②Amplifier x1 ⑤Speaker cable x4 3 m single-wire ( : brown, 〔10ft〕 ⑥Owner's Manual x1 : gray) ③AC adapter x1 ⑦Warranty x1 ④RCA cable x1 (1.
・Explanation of Graphical Symbols CAUTION The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
ENGLISH 7. Where not to use unit Do not use the unit in bathrooms, areas exposed to rain or snow, on the shore, near water or in humid conditions. Do not place the unit in unstable locations, in kitchens,near humidifiers, or in any location with likely exposure to smoke or steam. Do not place the unit in direct sunlight, near heating equipment or close to open flames. Fire, accident or malfunction may result. Do not place the unit in locations exposed to cold air or direct draft.
−5− shock (such as from an impact, static electricity or a power surge due to lightning), or if this product is used incorrectly, it may stop working properly. In such cases, press the power button to turn the power off and then back on again, and check if this product is working normally. ENGLISH 17. Volume Adjustment If abnormal noise is produced during play at high volume, reduce the volume level. Distorted sound can cause overheating of speakers and amplifier.
ENGLISH Notes on Use ■Volume Setting Before switching ON minimise the volume. Sudden, large output can damage the speakers. ■Volume Etiquette To avoid disturbance in your neighbourhood, enjoy your unit at an appropriate volume. Remember that at night, even low volume carries into surrounding areas. Help to maintain a pleasant living environment. ■Speaker Cord Connection Always connect speaker systems with power OFF.
① ①,②Speaker input terminals When connecting the speakers, insert the ends of the speaker cables so that they do not touch neighbouring terminals. Speaker cable ※It is recommended that the accessory speaker cables are used. (These cables are designed to provide optimum sound quality for this system.
ENGLISH ①Power indicator ① Power button "ON" : indicator lights Power button "OFF" ②Volume control knob. Turn to the right…Increases volume. Turn to the left…Decreases volume. ③Line input terminal (R) Connect to audio source using cable with RCA pin jack. ② ④Line input terminal (L) Connect to audio source using cable with RCA pin jack. ⑥ ⑤Power button Turns power ON and OFF. ⑥Power connector ③ ④ ⑤ Connect power supply here.
■Specifications Specifications and appearance are subject to change without prior notification. [Amplifier] Rated output: Max. output: Output type: Total high harmonic distortion: Frequency characteristics: Input sensitivity: Signal-to-noise ratio: Separation rate: Input impedance: Applicable load impedance: Dimensions: Weight: [AC Adapter] Input voltage: Output voltage: Output current: Dimensions: Weight: [Speakers] Diameter: Type: Input resistance: Impedance: Dimensions: Weight: 12W (at 8Ω load, T.H.
ENGLISH MEMO − 10 −
