Service manual

DCB, DCFCB and DCFCTB Models
86
Model DCFCTBD-IP
MERGEFORMAT Configuring the Informer-
IPFORMAT General Descriptionations
JP4
RS232 Serial Port
1 -
2 -
3 - Ground, 0.5 Amps maximum current capacity
4 - Radio transmit data from PC, standard RS232 levels
5 - Radio receive data to PC, standard RS232 levels
6 - Ground, 0.5 Amps maximum current capacity
JP5
FLASH Programming and Converter Configuration Port
1 -
2 - TX Data, standard RS232 levels
3 - RX Data, standard RS232 levels
4 - Ground
5 - Serial Clock input for FLASH programming, standard RS232
levels
6 - Processor Reset Not line, used in programming FLASH, 10K
pull-up
JP6
10.5-95 VDC Power Input
1 - (-)
2 - (+)
JP7
Resets board back to factory default settings.
J1
Ethernet Network Port
1 and 2 - Transmit data pair, balanced line
3 and 6 - Receive data pair, balanced line
4, 5, 7, 8 - AC coupled ground
Indicators
D1
CPU Heartbeat indicator, green
D2
Transmit data indicator, red
D3
Receive data indicator, yellow
D4
Power indicator, green
Controls
R1
600 ohm audio output level set
Environmental
Operating
Temperature
-30C - +65C
Humidity
0-95% non-condensing