User manual

8
Coloram Cable
Connect the dowsers to the Coloram II Power Supply using the 4-pin Coloram II Cable.
There is a limit to the number of dowsers/color changers and total cable lengths used
on one "home run". This is measured in "head-feet".
The definition of head-feet is THE SUM OF THE CABLE LENGTHS FROM EACH
DOWSER OR COLOR CHANGER TO A SINGLE POWER SUPPLY OUTPUT
CONNECTOR. See the Coloram II User Manual for a complete explanation of "head-
feet".
The head-feet limit for the Eclipse dowser is 1000 head-feet.
If a daisy chain consists of different models, use the model with the least amount of
"head feet" for the calculation. See the Coloram II User Manual for head-feet figures of
other Coloram II products.
Fan Speed Control
The fan in the Eclipse Dowser is small and cools electronics enclosure. Therefore, it
always runs at full speed and CANNOT be slowed or stopped.