System information

20
21
Back to Table of Contents
Back to Table of Contents
Picture In Picture (PIP)
With PIP you get a true picture-in-picture experience. This feature allows you to view one
program on a full screen with audio, while watching a second program on a mini inset screen,
referred to as the PIP screen. The PIP screen does not have audio; however, you do have the
ability to move the PIP screen to the location on screen that is the most convenient for your
viewing. View the PIP in the upper and lower right and left corners of the screen.
To use the PIP feature, follow these easy steps:
1. Press the button on your remote control; this will launch
your PIP screen. Both pictures will be tuned to the same
channel at launch.
2. Enter a new channel number on your remote control. The
most recently entered channel number will be viewable in
the main screen on your TV.
3. To swap the channel between the main screen and the PIP
screen press the button on your remote control.
4. Use the button on your remote control to move the PIP
from one corner of your TV screen to the other.
5. To change channels tuned on the main screen just use the
channel +/- button or the number key pad on your remote
control. Your PIP screen will remain viewable and on the
original channel selected each time you change the channel
on the main TV screen.
6. To exit the PIP screen, press the Exit to Live TV button on
your remote control.
Note: While the PIP feature is active you will not see an inset PIP appear in the info bar when
scrolling through channels or after pressing the last button. Once the PIP feature is deactivated
the inset PIP will resume in the info bar and last utton function. An important note to remember
is your ADTV service enables you to utilize up to 6 streams of video at a given time, the PIP
appearance on your TV screen utilizes a1 stream of video. This means while the PIP is in use you
are using 2 video streams on 1 TV at the same time. For more information on video streams
please see the FAQ section of your CCI Service Guide.
Channel Blocking
CCI gives you the ability to lock channels on your Digital TV service. Locking a channel will prevent
the corresponding programming from being viewed. To lock channels follow the next steps:
1. Press the Menu button on your remote control
2. Scroll to Settings
3. Select the Parental Controls option
4. Press OK on the Parental Locking option
5. Enter your 4-digit PIN when prompted
6. Scroll to the Change button for the Channels option and
press OK on your remote control
7. Scroll through the list of channels and press the OK button
on your remote control for each channel that you would like
to block
8. Once you are finished selecting channels, scroll to Save and
press OK on your remote control
9. To Unlock all channels on the list choose Unlock All and
press OK
10. Scroll to the Save button and press OK
Your channel locking preferences have now been set.
Note: To quickly view a list of the currently blocked channels, select
the view locked only option in the channel locking menu.
Advanced Digital TV