User manual

30
3. Map displays
Basic operation
Switching the map reduction scale
The map reduction scale (map range) can be switched to any desired setting from
40,960,000:1 to 5,000:1. Also, if the destination is set, you can switch to the reduction scale
showing the entire route to the destination with one touch.
To widen the map's range, touch
. To shrink it down, touch .
• Every time the touch switch is touched,
the scale goes up/down one level at a
time.
• After having touched or , touch
a number on the scale bar to switch to
the reduction scale represented by
that number.
• Touch continuously on or for at
least 1 second to switch the scale with no increments (free zoom).
• The reduction scale switched to will be indicated with a yellow mark ( ).
Touch switch Reduction scale Scale display Touch switch Reduction scale Scale display
1/0.01 million
1/0.02 million
1/0.04 million
1/0.08 million
1/0.64 million
1/1.28 million
1/2.56 million
1/5.12 million
1/10.24 million
1/20.48 million
1/0.005 million
150ft
300ft
700ft
0.25mi
0.5mi
4mi
8mi
16mi
30mi
60mi
130mi
1/40.96 million
250mi
1/0.16 million
1/0.32 million
1mi
2mi
Switching to the desired reduction scale
Scale bar
• The switch will disappear when setting to the maximum range (250 mile
scale diagram).
• For safety reasons, the scale cannot be free zoomed while driving.