User's Manual
Table Of Contents
- For the safe usage of this device
- Table of Contents
- 1. Safety precautions
- 2. Names and Major Functions of Each Component
- 3. Operations from the Navigation Screen
- 4. Setting a Destination
- 5. How to switch the audio source (mode)
- 6. Removing and inserting discs
- 7. Radio mode operations
- 8. DISC mode operations
- 9. Bluetooth Audio Operation
- 10. USB mode operations
- 11. iPod® mode operations
- 12. Setting sound quality
- 13. Bluetooth hands-free Operation
- 14. How to use ESN
- 15. REFERENCE
50
14. How to use ESN
The main unit is equipped with ESN (ECLIPSE
Security Network). A music CD (Key CD) which
has been registered in the main unit, is
necessary for ESN. Without it, none of the
functions will operate, even when the battery is
reconnected after it has been disconnected for
maintenance, or the ignition switch is turned to
ACC or ON after it has been turned to OFF (if
constant power to the main unit has been
disconnected or interrupted).
Register one of the CDs in your collection as
the key CD for the main unit.
aTouch [Info].
bTouch [ESN].
cInsert the music CD, then touch [Set up].
dTouch [YES] to accept or [NO] to cancel this
procedure.
● "Now setting SEC" will be displayed, followed by
"Security was set" indicating that registration of
the key CD has been completed.
aTouch [Info].
bTouch [ESN].
cInsert the key CD, then touch [Cancel].
dTouch [YES] to accept or [NO] to cancel this
procedure.
● "Canceling" will be displayed, followed by
"Security was canceled" indicating that
registration of the key CD has been canceled.
Registration of the key CD
ATTENTION
You cannot use a CD-RW, a CCCD (copy control CD),
or an MP3 or WMA CD as the key CD.
Canceling registration of the key
CD