User's Manual

How to operate the receiver with an optional DSP/EQ unit connected

Fine-tuning EQ functions

Press the [SEL] button until the desired equalizer mode

is displayed.

Turn the [SEL] button to switch frequencies.

The frequencies will switch in the following sequence:

Press the [SEEK /FAST ] button to adjust the level.

[SEEK ] button: Increases the value.

[FAST ] button: Decreases the value.

Hold down a button, [1] to [6], for more than two

seconds to preset a value.

63Hz 125Hz 250Hz 500Hz 1kHz 4kHz 12kHz

ATTENTION

When the preset value is changed, the display shows as follows:

USER

1~6 (Preset ch No.)

[SOUND] button

[SEEK ] button

Buttons [1] to [6]

[SEL]

button

[FAST ] button

[RTN] button

Press the [RTN] button.

At this time, other adjustments can also be made in Sound

Adjustment Mode.

Press the [SOUND] button to exit Sound Adjustment

Mode.

This cancels the adjustment mode. The selected value will

now take effect.