User manual

122
5. Route guidance
Navigation guidance
When approaching a freeway junction "interchange exit/junction" while route guidance is in
progress, the freeway junction guidance screen is automatically displayed on the present
location screen (when the present location is on the route).
Junction name display
The interchange exit/entrance name (IC) or
the junction (JCT) direction name is
displayed.
Remaining distance display
The distance to the junction intersection is
indicated. The number decreases.
Setting the freeway junction guidance screen
You can set the freeway junction guidance screen to display (ON) or not display (OFF).
Touch in the Menu screen.
Touch or for Guidance
screen on freeway.
● The selected touch switch will turn
green.
To u ch .
Freeway junction guidance screen
Setup
On Off
OK
●Freeway junction guidance will not be displayed for junctions for which no data
exists in the map data. Also, the junction point name may not be displayed even
if the freeway junction guidance screen is displayed.
●The junction point name displayed may differ from the actual junction name.
●In the following situations, freeway junction guidance is not performed:
• Immediately after route guidance is started
• In the vicinity of the destination
●The freeway junction guidance screen may be early or late.
●If the next junction intersection is close, the freeway junction guidance screen will
continue to be displayed.
●Touch in the Setup screen to return all items to their default settings.
Default