user manual

How to use the Card remote control

[BAND] button

[ PRESET CH ] buttons

[ TUNE•SEEK ] buttons

Selecting a station (manually or automatically)

Press the [ TUNE•SEEK ] button.

[ ] button: Tunes to higher frequency stations.

[ ] button: Tunes to lower frequency stations.

A short press of the button will allow manual station tuning.

Pressing for more than one second will start automatic tuning.

Selecting preset stations

Press the [ PRESET CH ] button.

[ ] button: Select the next higher number preset button.

[ ] button: Select the next lower number preset button.

Switching disc modes

Press the [BAND] button.

When one or two CD changers are connected, press the

[BAND] button to change modes from CD player ➔ CD

changer 1 ➔ CD changer 2.

The indicator will skip a changer or player that has no discs

loaded.

A total of six stations may be selected (preset tuning) out of

those already set in memory through the main unit. (Refer to

“Manually setting stations into memory,” page 52.)

How to play CDs

Select the disc mode first.