Operating instructions

3-4
D. CONTROLS AND INDICATORS
For descriptions of the lift controls and indicators, refer to the following sections:
1. CONTROL PENDANT
Refer to Figure [3-3]. The control pendant is a hand-held, hardwired remote device that controls
the lift functions. The pendant contains one spring-loaded, double-acting switch. The control
pendant mounts to a wall clip inside the vehicle near the door opening. To operate the / UP
or /DOWN functions, press and hold the switch until the function is completed.
The purpose of a power cut-off interlock system is to interfere with the operation of the lift if an
unsafe condition is present. When interlock systems are added to the lift, the light is an indication
whether or not the interlock is operating properly. The light is placed within the electrical system
so that no matter which interlock system/method is used, the light will be ON when the interlock
allows operation of the lift and OFF when the interlock has disabled the lift. When there is no
interlock system installed, the light stays illuminated at all times.
FIGURE [3-3]: CONTROL PENDANT