r Owner's manual




WhitePaper–NetworkingwithEclerNetManager
Document:AS Version:1.0 Date: Page10 of12


 Puttheproperdevice’snetworkconfiguration(IPaddressandmaskoftheremote
MIMO88):

Note:
Inthisscenario,theenteredGate way IP mustbethesameastheoneassignedtothe
remoteDSLrouterattheothersideoftheconnection,theroutertheMIMO88isconnected
to.RememberonceagainthattheroutermustallowforUDPtransitusingtheselectedport
(2210).
Seeontheappendixasmalllistofportsandprotocols.
 Doa“connect”: