Instruction Manual

OVU <Output Channel> <Pre Vumeter Level> <Post Vumeter Level> Shows the VU-meter value of an

Output Channel

ALARM_PROTECT <Output Channel> ON/OFF Shows the Protect alarm status of an

Output Channel

ALARM_FAULT <Output Channel> ON/OFF Shows the self-diagnosis system alarm

status of an Output Channel

INFO_NAME “<Device Name>” Shows the Device Name

INFO_MODEL <Device Model> Shows the Device Model

INFO_VERSION <Firmware Version> Shows the Firmware Version

INFO_MAC <Device MAC

address>

Shows the Device MAC address

ERROR

<Error ID> “<Error Description>” Informs about an error

Note: INC and DEC commands are replied with a DATA command from the device with the resulting LEVEL value, after it has been increased or decreased.

When the INC or DEC command tries to adjust a LEVEL value beyond its minimum or maximum limits, no reply (DATA command) will be produced.