Instruction Manual

MIMO88 DIGITAL MATRIX

TYPE PARAM1 PARAM2 PARAM3 PARAM4 DESCRIPTION

SET

PRESET <Preset Number> Sets the current PRESET

ILEVEL <Input Channel> <Level> Sets the current LEVEL of an Input Channel

OLEVEL <Output Channel> <Level> Sets the current LEVEL of an Output Channel

XLEVEL <Input Channel> <Output Channel> <Level> Sets the current LEVEL for a Matrix point

IMUTE <Input Channel> YES/NO Sets the current MUTE status of an Input Channel

OMUTE <Output Channel> YES/NO Sets the current MUTE status of an Output Channel

XMUTE <Input Channel> <Output Channel> YES/NO Sets the current MUTE status for a Matrix Point

GPO <Output> <GPO Value> Sets the current value for a General Purpose Output

INC

ILEVEL <Input Channel > <Value> Increases the current LEVEL of an Input Channel by

Value (Value can range from ±1 to ±100)

OLEVEL <Output Channel> <Value> Increases the current LEVEL of an Output Channel

by Value (Value can range from ±1 to ±100)

XLEVEL <Input Channel> <Output Channel> <Value> Increases the current LEVEL of a Matrix point by

Value (Value can range from ±1 to ±100)

DEC

ILEVEL <Input Channel > <Value> Decreases the current LEVEL of an Input Channel

by Value (Value can range from ±1 to ±100)

OLEVEL <Output Channel> <Value> Decreases the current LEVEL of an Output Channel

by Value (Value can range from ±1 to ±100)

XLEVEL <Input Channel> <Output Channel> <Value> Decreases the current LEVEL of a Matrix point by

Value (Value can range from ±1 to ±100)

ALL Subscribes to all VU-meters

IVU <Input Channel> Subscribes to an Input Channel VU-meter

OVU <Output Channel> Subscribes to an Output Channel VU-meter

UNSUBSCRIBE

ALL Unsubscribe to all VU-meters

IVU <Input Channel> Unsubscribe to an Input Channel VU-meter

OVU <Output Channel> Unsubscribe to an Output Channel VU-meter

Note: INC and DEC commands are replied with a DATA command from the device with the resulting LEVEL value, after it has been increased or decreased.

When the INC or DEC command tries to adjust a LEVEL value beyond its minimum or maximum limits, no reply (DATA command) will be produced.