OWNER’S MANUAL MANUAL DE APLICACIÓN TP-NET
TP-NET OWNER’S MANUAL TP-NET PROTOCOL 04 NXA DIGITAL AUDIO MANAGER SERIES 07 NZA MULTICHANNEL AMPLIFIER SERIES 10 NPA STEREO AMPLIFIER SERIES 12 MIMO88 DIGITAL MATRIX 14 ERROR CODES 17 3
TP-NET protocol (Third-Party NET) The TP-NET protocol lets a client device get and/or set the values of several parameters of the EclerNet compatible devices (the MIMO88 digital matrix, the NXA digital audio manager series, the NZA amplifier series, the NPA amplifier series, etc.), like volumes, mutes, alarms, etc. The communication with these EclerNet devices is established using Ethernet and the UDP/IP transport protocol, always by means of the 5800 UDP port.
At the end of this document you’ll find all the available messages and their parameters for each model of EclerNet compatible device. The SYSTEM, GET, SET, INC, DEC, SUBSCRIBE & UNSUBSCRIBE messages can be sent from the client to the EclerNet device. The DATA & ERROR messages can be sent from the device to the client.
masters. For the NXA series GPI values can be within the [1..4] or [1..6] range, depending on models 6 is a numerical value within the [0..100] range that indicates the value of an analogue GPI input. For a digital input only 0 or 100 are the possible values is a numerical value within the [0..1] range: it can only be 0 or 1 (opened or closed GPO) is a numerical value within the [1..
NXA DIGITAL AUDIO MANAGER SERIES TYPE SYSTEM PARAM1 CONNECT PARAM2 [PINGPONG] PARAM3 DISCONNECT GET SUBSCRIPTION_RATE PING PONG ALL POWER PRESET OLEVEL XLEVEL OMUTE
NXA DIGITAL AUDIO MANAGER SERIES TYPE SET INC DEC SUBSCRIBE UNSUBSCRIBE DATA 8 PARAM1 POWER PRESET OLEVEL PARAM2 ON/OFF
ERROR OVU
NZA MULTICHANNEL AMPLIFIER SERIES TYPE SYSTEM PARAM1 CONNECT PARAM2 [PINGPONG] DISCONNECT GET SUBSCRIPTION_RATE PING PONG ALL POWER PRESET OLEVEL OMUTE
NZA MULTICHANNEL AMPLIFIER SERIES TYPE SET SUBSCRIBE UNSUBSCRIBE DATA ERROR PARAM1 POWER PRESET OLEVEL PARAM2 ON/OFF
NPA STEREO AMPLIFIER SERIES TYPE SYSTEM PARAM1 CONNECT PARAM2 [PINGPONG] DISCONNECT GET SUBSCRIPTION_RATE PING PONG ALL POWER PRESET OLEVEL OMUTE OVU ALARM_PROTECT ALARM_THERMAL ALARM_LOAD ALARM_VOLTAGE INFO_NAME INFO_MODEL INFO_VERSION INFO_MAC 12
NPA STEREO AMPLIFIER SERIES TYPE SET SUBSCRIBE UNSUBSCRIBE DATA ERROR PARAM1 POWER PRESET OLEVEL PARAM2 ON/OFF
MIMO88 DIGITAL MATRIX TYPE SYSTEM PARAM1 CONNECT PARAM2 [PINGPONG] PARAM3 DISCONNECT GET SUBSCRIPTION_RATE PING PONG ALL PRESET ILEVEL OLEVEL XLEVEL IMUTE OMUTE XMUTE IVU OVU GPI GPO INFO_NAME INFO_MODEL INFO_VERSION INFO_MAC 14
MIMO88 DIGITAL MATRIX TYPE SET INC DEC SUBSCRIBE UNSUBSCRIBE PARAM1 PRESET ILEVEL OLEVEL XLEVEL IMUTE OMUTE XMUTE GPO ILEVEL PARAM2
MIMO88 DIGITAL MATRIX TYPE DATA ERROR 16 PARAM1 PRESET ILEVEL OLEVEL PARAM2
ERROR CODES ERROR ID 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 DESCRIPTION No Error Invalid field TYPE Invalid field PARAM1 Invalid field PARAM2 Invalid field PARAM3 Invalid field PARAM4 Timeout waiting for PONG CONNECT received while connected DISCONNECT received while unconnected Invalid client IP (client IP different from CONNECT message) Message too long (more than 80 characters) Unsupported Preset number Unsupported Message Unsupported Input Channel number Unsupported Output Channel number Uns
MANUAL DE APLICACIÓN TP-NET PROTOCOLO TP-NET 19 AMPLIFICADORES SERIE NXA 22 AMPLIFICADORES SERIE NZA 25 AMPLIFICADORES SERIE NPA 27 MATRIZ DIGITAL MIMO88 30 CÓDIGOS DE ERROR 34 18
Protocolo TP-NET (Third-Party NET) El protocolo TP-NET permite a un equipo cliente consultar y modificar diversos parámetros internos de dispositivos compatibles EclerNet (matriz digital MIMO88, gestor digital de audio serie NXA, amplificadores serie NZA, amplificadores serie NPA, etc.), como volúmenes, mutes, alarmas, etc. La comunicación con dichos dispositivos se realiza a través de Ethernet y usando el protocolo de transporte UDP/IP, utilizando el puerto registrado 5800 de UDP.
UNSUBSCRIBE DATA ERROR En las tablas del final del documento se describen los distintos tipos de mensajes y sus correspondientes parámetros asociados. Los mensajes tipo SYSTEM, GET, SET, INC, DEC, SUBSCRIBE y UNSUBSCRIBE son los que pueden ser enviados del cliente al dispositivo EclerNet, mientras que los mensajes DATA y ERROR son los enviados del dispositivo EclerNet al cliente.
o Para los amplificadores serie NPA este valor ser un número en el rango [1..10] o Para los amplificadores serie NZA el rango es [1..5] , y son valores numéricos en el rango [0..100] que definen valores en una escala equivalente a [-inf..0] en dB y son valores numéricos el rango [1..8] para MIMO88, configurados como Master 8x8, y [1..
SERIE NXA TYPE SYSTEM PARAM1 CONNECT GET DISCONNECT SUBSCRIPTION_RATE PING PONG ALL PARAM2 [PINGPONG] PARAM3 POWER PRESET OLEVEL XLEVEL OMUTE XMUTE OVU ALARM_PROTECT ALARM_FAULT INFO_NAME INFO_MODEL INFO_VERSION INFO_MAC 22
SERIE NXA TYPE SET INC DEC SUBSCRIBE PARAM1 POWER PARAM2 ON/OFF PRESET OLEVEL
DATA ERROR OVU
AMPLIFICADORES SERIE NZA TYPE SYSTEM PARAM1 CONNECT GET DISCONNECT SUBSCRIPTION_RATE PING PONG ALL PARAM2 [PINGPONG] POWER PRESET OLEVEL OMUTE OVU ALARM_PROTECT INFO_NAME INFO_MODEL INFO_VERSION INFO_MAC
AMPLIFICADORES SERIE NZA TYPE SET SUBSCRIBE PARAM1 POWER PARAM2 ON/OFF PRESET OLEVEL
AMPLIFICADORES SERIE NPA TYPE SYSTEM PARAM1 CONNECT GET DISCONNECT SUBSCRIPTION_RATE PING PONG ALL PARAM2 [PINGPONG] POWER PRESET OLEVEL
AMPLIFICADORES SERIE NPA TYPE SET SUBSCRIBE PARAM1 POWER PARAM2 ON/OFF PRESET OLEVEL
AMPLIFICADORES SERIE NPA TYPE DATA ERROR PARAM1 POWER PARAM2 ON/OFF PRESET OLEVEL
MATRIZ DIGITAL MIMO88 TYPE SYSTEM PARAM1 CONNECT PARAM2 [PINGPONG] PARAM3 DISCONNECT SUBSCRIPTION_RATE PING PONG GET ALL PRESET ILEVEL OLEVEL
MATRIZ DIGITAL MIMO88 TYPE SET INC DEC PARAM1 PRESET PARAM2 PARAM3 ILEVEL OLEVEL
SUBSCRIBE UNSUBSCRIBE XLEVEL ALL IVU OVU
MATRIZ DIGITAL MIMO88 TYPE DATA ERROR PARAM1 PARAM2 PARAM3 PARAM4 PRESET ILEVEL OLEVEL
CÓDIGOS DE ERROR ERROR ID 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 34 DESCRIPCIÓN No Error Campo TYPE inválido Campo PARAM1 inválido Campo PARAM2 inválido Campo PARAM3 inválido Campo PARAM4 inválido Tiempo de espera de PONG agotado (“time-out”) CONNECT recibido estando previamente conectado DISCONNECT recibido estando previamente desconectado Cliente IP inválido (cliente IP diferente del establecido en el mensaje CONNECT) Mensaje demasiado largo (más de 80 caracteres) Número de PRESET no soportad
ECLER Laboratorio de electro-acústica S.A. Motors 166-168, 08038 Barcelona, Spain INTERNET http://www.ecler.com e-mail: info@ecler.es 50.0216.01.
