Owner manual

37
Miscellaneous
Management Connectivity:
Ethernet Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m.
RS-232 Baud rate: 57600 (fixed, no autonegotiation)
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
Expansion LINK BUS (16x16 ch.) Proprietary over CAT5, Xover cable up to 100m.
Remote Bus 2, over twisted pairs; up to 1km (see specific specs.)
GPI 8, from 0 to 10VDC or TTL level
GPO 8, 3 poles isolated relay; 1A, 48VDC max.
Aux. Power Supply for Remotes & GPI +12VDC, 1.2A. max. (short circuit protected)
Time and date retention (battery) 1 month aprox. (ambient temperature dependant)
RTC accuracy ±1 minute /year
SOFTWARE
EclerNet Software
- Realtime full GUI of all functions and controls thru Ethernet with
interactive graphical display
- Grouping mode channels or devices
- Grouping of other groups
- Automated report generation
- Up to 256 devices on same net.
- Autodiscovery devices feature
- Routing capability through NAT gateways.
- Real time metering at input/output (DSP)
- Device “Finder” feature
- Save & Recall setup and preset functions
- Firmware update capability thru Ethernet
- Password protection (device & project with two user levels)
- Default Network configuration:
IP: 192.168.0.100
Mask: 255.255.255.0
Gate: 192.168.0.1
UDP Port: 2210
Operating System: Windows® W2000 Prof. (SP4); XP Prof. (SP3); Vista (SP1), W7
Minimum EclerNet System Requirements:
Pentium IV ® 1GHz
512MB RAM
40MB HDD free space
800x600 pixels & 16bits color display
10/100/1G Ethernet Network card