IC Series LOUDSPEAKERS In-ceiling / In-wall Loudspeaker USER MANUAL
INDEX 1. IMPORTANT REMARK .................................................................................... 3 2. IMPORTANT SAFETY INSTRUCTIONS .............................................................. 3 3. IMPORTANT NOTE ......................................................................................... 5 4. INTRODUCTION ............................................................................................. 5 4.1 IC3 ................................................................
1. IMPORTANT REMARK The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10.
3. IMPORTANT NOTE Congratulations! You are the owner of a carefully designed and manufactured equipment. We thank you for trusting in us and choosing our IC-series speaker for false ceilings. In order to get the optimum operation and efficiency from this unit, it is VERY IMPORTANT - before you plug anything - to read this manual very carefully and bear in mind all considerations specified within it. We strongly recommend that its maintenance be carried out by our Authorized Technical services. 4.
4.2 IC6 • • • • • • • • • 2 way speaker for false ceilings 6” polypropylene woofer 25mm tweeter Power: 40W RMS@8 Sensitivity (1W/1m): 88 dB SPL Built-in transformer. External diameter: 204mm Cut out diameter: 180mm Installation system: Three revolving fasteners 4.3 IC8 • • • • • • • • • 2 way speaker for false ceilings 8” polypropylene woofer 25mm tweeter Power: 60W RMS@8 Sensitivity (1W/1m): 89 dB SPL Built-in transformer.
5. CONNECTIONS The connection terminals for models IC6 and IC8 are of the pressure clamp type for bare cable. Once connected, just select the mode and working power of the unit with a simple screwdriver. Always respect the polarity. IC6 Connection plate In the IC3 model, the connection terminals are screw-type terminal blocks.
6. LOCATION AND ASSEMBLY To install this product correctly, you must be prepared to cut circular holes where you would like to place the speakers and have the wiring necessary for each unit. In order to install the speakers correctly: 1. Remove the protective grating from the speaker using the hook provided in the packaging. 2. Cut a circular hole in the false ceiling: A template for cutting/painting is included with each unit to simplify this process.
7. PAINTING The IC series is designed to be painted, meaning it can be installed anywhere, regardless of the aesthetic criteria of the place where it will be used. In order to paint any of the models in the product line: 1. Remove the protective grating from the speaker using the hook provided in the packaging. 2. Once the cut/paint template has been separated into two parts, use the inside disk to protect the speaker cone. Place it tight on the cone.
8. TECHNICAL CHARACTERISTICS IC3 IC6 IC8 Nominal low impedance 8Ω 8Ω 8Ω 100V Transformer Taps 1.5, 3, 6 W 2.5, 5, 7.5, 15W 5, 7.5, 15, 30W RMS power 70V Transformer Taps Frequency response (-6dB) Sensibility 1W/1m External diameter Internal diameter Recommended cut out diameter Required depth Weight 10W 40W 0.75, 1.5, 3 W 200Hz – 20kHz 90dB 105mm 1.25, 2.5, 3,75, 7.5W 70Hz – 20kHz 88dB 204mm 88mm 178mm 90mm 180mm 90mm 73mm 0.5Kg 1.5Kg 10 60W 2.5, 3,75, 7.
All product characteristics are subject to variation due to production tolerances. NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications. 11 Motors, 166‐168 08038 Barcelona ‐ Spain ‐ (+34) 932238403 information@ecler.es www.ecler.
