Bluetooth Manager

ECLER TECHNICAL MANUAL

Ecler Bluetooth® Manager

W INDOWS A P P L I C A T I O N

Configuration tool for Ecler Bluetooth® devices

PROD U C T O V E R V I E W

Ecler Bluetooth Manager is a Windows© application that allows configuring Bluetooth® parameters, such as the Bluetooth®

name shown in compatible devices or the password for pairing.

VE R S I O NS

 V1.0 [JAN19] – Lastest release

LIS T O F C OM P A TI BLE D E VICE S

 eCOMPACT4BT

OPE R A T I ON

eCOMPACT4BT

1. Connect the RS-232 cable to the RS-232 PORT on the eCOMPACT4BT.

2. Change the INPUT 1 SELECTOR to BT.

3. POWER OFF the device and POWER ON it again while pressing PAIR BUTTON. When POWERED ON, the BT PAIR LED will

remain ON – BLUE fixed. This enables the USER to configure the Bluetooth® parameters.

4. On the computer, open Ecler Bluetooth Manager Application. It will show this interface:

PAGE 1
ECLER TECHNICAL MANUAL Ecler Bluetooth® Manager WINDOWS APPLICATION Configuration tool for Ecler Bluetooth® devices P R OD U C T O V E R V IE W Ecler Bluetooth Manager is a Windows© application that allows configuring Bluetooth® parameters, such as the Bluetooth® name shown in compatible devices or the password for pairing. V E R SI O N S  V1.0 [JAN19] – Lastest release LI S T OF C OM P A TI BLE D E V IC E S  eCOMPACT4BT OP E R A TI O N eCOMPACT4BT 1.
PAGE 2
ECLER TECHNICAL MANUAL 5. Select the correct COM Port and click on READ button. Verify that the information about NAME and PIN of the device appear on the screen. This information must be like the following (factory defaults): 6. Change the NAME and PIN as you wish, and click on WRITE button. 7. POWER OFF and ON the device to apply changes.