Owner manual

31
9. DIAGRAMS 9. DIAGRAMAS
9. SCHÉMAS 9. DIAGRAMME
9.1. Configuration diagram 9.1. Diagrama de configuración
9.1. Schéma de configuration 9.1. Konfigurations diagramm
FACTORY ADJUSTED PROGRAM (TALKOVER DISABLED)
SOLDERING CONFIGURATION.
BUS ASSIGNMENT
INPUT 7INPUT 8
MICRO (TALKOVER ENABLED)
BOTTOM VIEW.
CAUTION: DISCONNECT THE UNIT FROM THE MAINS SUPPLY
REMOVE THE SHIELDING PLATE.
ATTENTION: ANY CHANGE IN THE CONFIGURATION OF THE UNIT MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN.
OUTPUT LEVEL
OUT 2 OUT 1
0dB +6dB FACTORY ADJUSTED