Manual

29
7. DIAGRAMS 7. DIAGRAMAS
7. SCHÉMAS 7. DIAGRAMME
7.1. Talkover control bus configuration diagram
7.1. Diagrama de configuración del bus de control de talkover
7.1. Schéma de configuration du bus de commande de la fonction Talkover
7.1. Konfigurationsdiagramm für die Zuordnung der Talkover-Funktion
FACTORY ADJUSTED PROGRAM (TALKOVER DISABLED)
SOLDERING CONFIGURATION.
BUS ASSIGNMENT
INPUT 4INPUT 5
MICRO (TALKOVER ENABLED)
BOTTOM VIEW.
CAUTION: DISCONNECT THE UNIT FROM THE MAINS SUPPLY
REMOVE THE SHIELDING PLATE.
ATTENTION: ANY CHANGE IN THE CONFIGURATION OF THE UNIT MUST BE CARRIED OUT BY A QUALIFIED TECHNICIAN.