User guide

CAseriespresetssaveandrecall
page2/4

Andthesearethegeneraldeviceparameters,whicharenotpreset‐dependant(they
arenotstoredinapresetwhenitissaved,thusthey’renotmodifiedwithapreset
recall):

 AMPLIFIERworkingmode:STEREO,MONO,BRIDGE,ZONES(CA40:configured
byhardwaredipswitches)
 Auto‐StandbyfunctionON/OFFstatus(CA40:configuredbyhardwaredip
switches)
 REMOTEportON/OFFstatus(CA40:configuredbyhardwaredipswitches)
 REMOTEportinputs/presetsselectionmode
 Preset#1automaticrecoveryatstartup
 Infraredreceiverenable/disablestatus(CA40:notapplicable)
 LCDmodewhenidle:ON,OFF,DIMMED
(CA40:notapplicable)
 LCDcontrastvalue(CA40:notapplicable)
 ZONELABEL(CA40:notapplicable)