User guide

ManualsBrandsEcler ManualsReceivers and AmplifiersCA series

CAseriespresetssaveandrecall

page1/4

ENGLISHVERSION



CAseriesPresetscontents,saveandrecovery



1.Introduction



The CA series devices (CA40, CA200z) can store a total of 5 presets, or global

configuration“pictures”ofthedevice.OncetheyhavebeensavedintotheCAdevice

memory, recalling a preset is just like changing the full CA device configuration

instantaneously,withasetofparameters’values(volumes,EQ,etc.)thatmatchthose

onesthedevicehadwhenthepresetwassaved.By recallingpresets,theendusergets

a fast and friendly way to change the working mode of the CA device, adapting it to

differentapplicationneeds.



Apresetcanbesavedby3differentmethods:

 Usingthefrontpanelcontrols(exceptCA40)

 Using the TP‐NET third‐party protocol, from an external device (SAVE_PRESET

<PresetNumber>)

 UsingtheEclerCOMMsoftwareapplication



Anditcanberecalledby4differentmethods:

 Usingthefrontpanelcontrols(exceptCA40)

 Using an external device (WPm series, for instance), connected to a 0‐10VDC

REMOTEportintheCAdevice

 UsingtheTP‐NETthird‐partyprotocol, from anexternal device( LOAD_PRESET

<PresetNumber>)

 UsingtheEclerCOMMsoftwareapplication



2.ParametersincludedandexcludedinPresets 



Thesearetheparameterswhosevaluesarestoredinapresetatthetimethepresetis

savedintheCAdevice’smemory:



 INPUTsselection(peroutputzone)

 INPUTsvolumelevel,bassandtrebleadjustments

 OUTPUTsvolumelevelandMUTEstatus

 MICROPHONEinputsNoiseGateenable/disablestatus(CA40excluded,

configuredbyhardwaredipswitches)

 MICROPHONEinputsTalkover/PagerfunctionON/OFFstatusstatus(CA40

excluded,configuredbyhardwaredipswitches)

 MICROPHONEinputsNoiseGateandTalkover/Pagerparameters(threshold,

attenuation,attacktime,etc.)

 PanelLockedON/OFFstatus(frontpanelhardwarecontrols)



Summary of content (4 pages)

PAGE 1
CA series presets save and recall ENGLISH VERSION CA series Presets contents, save and recovery 1. Introduction The CA series devices (CA40, CA200z) can store a total of 5 presets, or global configuration “pictures” of the device. Once they have been saved into the CA device memory, recalling a preset is just like changing the full CA device configuration instantaneously, with a set of parameters’ values (volumes, EQ, etc.) that match those ones the device had when the preset was saved.
PAGE 2
CA series presets save and recall And these are the general device parameters, which are not preset‐dependant (they are not stored in a preset when it is saved, thus they’re not modified with a preset recall):  AMPLIFIER working mode: STEREO, MONO, BRIDGE, ZONES (CA40: configured by hardware dip switches)  Auto‐Standby function ON/OFF status (CA40: configured by hardware dip switches)  REMOTE port ON/OFF status (CA40: configured by hardware dip switches)  REMOTE port inputs/presets selection mode 
PAGE 3
CA series presets save and recall SPANISH VERSION Presets de la serie CA: parámetros incluidos y excluidos 1. Introducción Los dispositivos de la serie CA (CA40, CA200z) pueden almacenar un total de 5 “presets” o memorias globales de configuración del equipo. Una vez almacenados en su memoria, recuperar uno de ellos es equivalente a configurar de manera instantánea el equipo con una serie de valores predefinidos de sus parámetros o ajustes (volúmenes, ecualización, etc.
PAGE 4
CA series presets save and recall  Entradas de MICRÓFONO, parámetros de las funciones Noise Gate y Talkover (umbral, atenuación, tiempo de ataque, etc.