User Manual

CA‐NETProtocol
page6/29

o IN_SEL_IN_LEVEL:oneinput(source)selectionforoneorseveraloutputzones(with
the5positionselector)+thecontroloftheselectedinput’scrosspointsleveltothe
destinationzones
o IN_SEL_ZONE_VOL: one input (source) selection for one or several output zones
(withthe5positionselector)+thecontroloftheaffectedzonesoutputvolume
o PRESET:apresetrecovery,fromP1toP5(withthe5positionselector)
o PRESET_ZONE_VOL:apresetrecovery,fromP1toP5(withthe5positionselector)+
volumecontrolforoneorseveralzoneoutputs
 PAGER/DUCKERparameterforTALKOVER_MODEcommand:
o INPUT 5 can be used with the Talkover feature in PAGER or DUCKER mode. PAGER
moderequiresanexternalpagingstation (MPAGE4)to select thedestination zones
andperformingthepaging
o INPUT4canbeusedwiththeTalkoverfeaturejustinDUCKERmode
