User Manual

CA‐NETProtocol
page5/29

ignored those exceeding this limit. Blank characters are not allowed. A valid example:
MAIN_HALL
 <DisplayMode>aretextstrings(withoutblankspaces)thatidentifytheLCDdisplayworking
mode.IntheCA200ztherearejustthreepossiblevaluesforthisparameter:
o ON
o DIMMED
o OFF
 <Contrast Level> are numerical values in the [0…100] range that define the LCD display
contrastlevel.
 <Assign Value> are text strings (without blank spaces) that identify the Talkover / Pager
functionassignmentforaMICinputtowardsthe device’soutputs.IntheCA200zthereare
justfivepossiblevaluesforthisparameter:
o OFF
o ZA
o ZB
o ZA‐B
o PAGER
 <Priority>isanumericalvaluethatdefinestheTalkoverfunctionpriorityofoneMICinputin
frontoftheotherinputsintheunit.InthecaseoftheCA200zjusttwovaluesare valid[1,
2],being“1”thehighestpriorityleveland“2”thelowerone.
 <ErrorID>isanumericalvalueforanerrorcode.
 “<Error Description>” is a text chain inside double quotation marks, containing an error
description.

DAM514NOTES:
 <RemoteMode>parameter
OriginallydesignedtoconnectWPmVOL‐SR(orWPTOUCH)wallpanelstotheREMOTEports
in the DAM514: panels that include a volume control knb and a 5‐position selector knob.
The possibleworking modes (REMOTE_MODE command)of any of the 4 available remote
ports(R1toR4)intheunitare:
o DISABLED
o IN_VOL:volumecontrolforoneorseveralinputs(generalinputvolume,affectingall
thepostprocessing)
o ZONE_VOL:volumecontrolforoneorseveralzoneoutputs
o IN_SEL: one input (source) selection for one or several output zones (with the 5
positionselector)