User guide

13. TECHNICAL CHARACTERISTICS 13. CARACTERÍSTICAS TÉCNICAS
13. CARACTÉRISTIQUES TECHNIQUES 13. TECHNISCHE DATEN
INPUT SECTION
Sensitivity
0dBV
Input impedance >20k electronically balanced
CMRR >55dB (20Hz ÷ 20kHz)
Input connector XLR3 female
OUTPUT SECTION
Nominal Output level
Output impedance
0dBV
300 electronically balanced
Output connector XLR3 male
A/D & D/A
24bit / 48kHz
FREQUENCY RESPONSE
<10Hz ~ 20kHz
OUTPUT NOISE FLOOR (FFT)
<-115dB (from 20Hz to 20kHz)
THD + NOISE
< 0.0028% (1kHz, 1Vrms)
CROSSTALK
>95dB, 30Hz ÷ 20kHz
CROSSOVER FILTERS
Slopes 6, 12, 18, 24 or 48dB/octave (Filter type dependant)
Type Linkwitz-Riley, Butterworth or Bessel
DELAYS
Input delay / step 1seg / 20,8µs
Output delay / step 1seg / 20,8µs
EQ
Input EQ quantity 4 per channel
Output EQ quantity 8 per channel
Parametric EQ: Type Parametric EQ: Q: 0.3 to 200
Low & High Shelf 6/12 dB/oct
Low & High Pass 6/12 dB/oct
Gain -60dB ~ +12dB step 0.1dB
Frequency 20Hz ÷ 20kHz
COMPRESSOR
Threshold -36 / +12dBV
Attack time 0.1 ~ 500ms
Release time 1 ~ 5s
Ratio 1:1 to ∞ :1
GENERAL
Mains 90÷264VAC 50/60Hz
Power consumption 25VA
Dimensions WxHxD 482.6x44x120mm
Weight 1.75kg
ECLER Laboratorio de electro-acústica S.A.
Motors 166-168, 08038 Barcelona, Spain
INTERNET http://www.ecler.com e-mail: [e-mail]
50.0259.01.02