Manualshelf

Technical Specifications

ManualsBrandsEclectic Products ManualsAdhesivesAmazing Goop® II Max™ Adhesive & Sealant - 2 oz
123
Technical
Data Sheet
AMAZING GOOP
®
II
MAX™
ULTIMATE REPAIR GLUE - REAL WORLD TOUGH. REAL WORLD USE.
AMAZING GOOP
®
II MAX™ | Rev 03 – Effective: 14May01 / Approved: 35TMorgan Page | 1
Eclectic Products, Inc.
Manufacturing Facility
101 Dixie Mae Drive
Pineville, Louisiana
eclecticproducts.com
800.349.4667
ISO 9001:2008
Compliant
Quality Management
Systems
Administration Office
Eugene, Oregon
eclecticproducts.com
800.693.4667
PRODUCT DESCRIPTION
AMAZING GOOP® II MAX™ is the ultimate repair glue that permanently holds its bond
and remains flexible through all types of weather conditions,
vibrations and uses.
WHERE TO USE / APPLICATIONS
The waterproof and paintable features help the product – and
your repair - to remain perfect for REAL WORLD applications!
Great for sporting equipment and any other outdoor
application you can think of! Use on virtually any material indoors or out!
FEATURES AND BENEFITS
UV INHIBITORS – Resists yellowing or cracking through all types of weather conditions.
ALL WEATHER BOND – Formula is waterproof and contains UV inhibitors which allow it to
withstand even the toughest of conditions outdoors.
PERMANENT – Exceptional bond strength to almost any substrate.*
FLEXIBLE – Does not become brittle even in cold weather and is excellent for bonding items
subject to vibration.
PAINTABLE – Paintable after full cure.
*Not recommended for use on polystyrene, polyethylene, polypropylene, Styrofoam™ or paper products.
TECHNICAL INFORMATION
PROPERTIES – Medium Viscosity
UNCURED MATERIAL
VOC:
Solvent:
Non-flammable:
Density:
Solids:
Viscosity:
Tack time:
Set time:
Full cure time:
Storage:
Freeze/thaw stability:
Clear
2.0 grams/liter
Perchloroethylene
Yes
11.0 +/-0.1 lbs/gal
30% by weight, 40% by volume
100,000 cps medium
~ 4 minutes
20 minutes*
Thin film: 24 hours / Thick film: 48-72 hours
Store in dry area between 50 and 80 °F (10 and 27 °C)
Stable, allow product to warm to room temperature before using
2 years (unopened)
*Depending on material, humidity and temperature.
CURED MATERIAL
Hardness:
Dielectric strength:
Tensile strength:
Elongation:
Temperature range:
UV resistance:
Excellent to water, dilute acids and dilute bases
80 Shore A
400V/mil (ASTM D-149); this is the maximum voltage that can be applied
to a given material without causing it to break down
3500 lb/in
2
(ASTM D-412)
900% (ASTM D-412)
-40 to 150 °F (-40 to 66 °C)
Yes
24 hours

Summary of content (3 pages)