Specifications

B-FOCuS 270/285/400 PR Configuration Manual
ECI Telecom Ltd. Proprietary 45
6.3. Defining a Routed IPoA per RFC 1483
You can define a router in two ways. The basic workflow is simple, but most of the
parameters are defined by default. The advanced workflow enables detailed definition
of most parameters.
6.3.1. Basic Workflow
 To define a routed IPoA per RFC 1483 using the basic method:
1. From the Basic operations menu select WAN Setup. The WAN Setup dialog box
appears.
2. Click the RFC 1483 Routed radio button. Define VPI, VCI, encapsulation type
(LLC/SNAP) and check Enable NAPT. Define a WAN IP address and subnet
mask.
3. At the bottom of the dialog box click Add. Check that a line is added to the table
containing the values you have defined.
6.3.2. Advanced Workflow
 To define a routed IPoA per RFC 1483 using the advanced method:
1. From the Advanced menu click Configure. Select the radio button in a line with
an available ATM interface (in this example: atm4).
2. At the bottom of the dialog box click Configure Interface. The ATM Interface
Configuration dialog box appears.