Specifications

ECI Telecom Ltd. Proprietary vii
Purpose
This guide describes how to install ECI’s Optical Network Termination (ONT)
unit, B-FOCuS O-4F2P, at the customer premises.
Intended Audience
This document is intended for technicians responsible for:
| Unpacking and mounting the ONT and power supply
| Connecting the ONT to the PON network
| Connecting external equipment to the ONT
All ONT configurations are performed via the Element Management system
with no configuration needed
Overview
This manual is organized as follows:
| Chapter 1: Product Description
Provides an introduction to the ONT including physical, electrical,
environmental and optical specifications.
| Chapter 2: Safety
Provides electrical, electrostatic, and laser safety information; fiber optic
cable handling techniques are also discussed.
| Chapter 3: Installing the ONT
Describes installation procedures including site preparation, unpacking and
mounting the ONT, connecting power and fiber optic and cables,
About This Manual