Specifications

Installation B-FOCuS O-4F2P
3-10 ECI Telecom Ltd. Proprietary
Verifying Services
Follow local practices to connect to each active service port in the B-FOCuS O-
4F2P to confirm service activation.
1. Connect to each active phone jack to verify telephone numbers and services.
Verify that the POTS LED lights green when a line is off hook.
2. If Ethernet service is included in this installation, confirm that data is being
received and transmitted normally. The LAN LED flashes during data
transmission.
Configuration of the B-FOCuS O-4F2P
As mentioned above, the B-FOCuS O-4F2P is activated and configured
through the E-OPS Element Manager. Refer to the E-OPS Hi-Care User Guide
for details.
No local management interface in the B-FOCuS O-4F2P is required unless L3
services are enabled or if password activation is used.
The Layer 3 service (PPPoE/DHCP/NAT) is available through Ethernet port 1
or 2only.
Layer 3 configuration is detailed in the chapter that follows.