Installation Manual

Introduction
The SKANTI
®
Scansat-7701 is a single-channel Iridium
®
satellite
system designed for the harsh sea environments with professional
mariners and serious yachtsmen in mind.
The SKANTI Scansat-7701 conform to all relevant international
requirements.
The SKANTI Scansat-7701 system consist of a compact Transceiver
Unit (ITU 7701), a small Antenna Unit (IAU 7701), and two types of
control units: a Control Unit Handset (ICUH 7701) and a Control Unit
for Desk mounting (ICUD 7701).
The Control Unit ICUH 7701/ICUD 7701 with display and splash-
proof keypad is used for controlling the "black box" Transceiver Unit
and the remote Antenna Unit facilitating installation. The SKANTI
Scansat-7701 Iridium telephone offers both telephony and data
transmission at 2,400 bit/s. A dedicated 'Alert' button for emergency
situations is integrated in the Control Unit for dialling the nearest
Iridium Gateway, which will route the call to any RCC (Rescue Co-
ordinating Centre) selected.
The SKANTI Scansat-7701 Iridium system provides flexible installa-
tion:
- Up to 50 m between the Control Unit and
the Transceiver Unit
- Up to 100 m between the Handset Control Unit and
extra Handset Control Units
- Up to 30 m between the Transceiver Unit and
the Antenna Unit depending on cable type.
The SKANTI Scansat-7701 standard power supply is 10-32V DC,
optionally 110-230 V AC (external adaptor).
Please note
Any responsibility or liability for loss or damage in connection with
the use of this product and the accompanying documentation is
disclaimed. The information in this manual is furnished for informa-
tional use only, is subject to change without notice, may contain
errors or inaccuracies, and represents no commitment whatsoever.
This agreement is governed by the laws of Denmark.
Doc. no.: M4155GB9 Issue: G/0303