Operation Manual

 Pul sports-300/400  Pulsports-300/400
E8- -E9
1. Press ST/SP to start/stop countdown timer.
Countdown timer mode
2. Symbol as ” “ will display when start counting down
3. There will be a 10 seconds beep when the function is
completed, ” “ will flash, and OVEr will display on the LCD.
4. Stop beep and reload pre-set data by pressing any key.
5. Reload pre-set date at any time by pressing T.MODE 2 seconds.
6. Maximum range for countdown is 99H59M59S.
7.
a). Press T.MODE to select “TIMER” mode.
Countdown timer setting:
b). Press SET for 2 seconds to enter timer.
c). Press T.MODE or ST/SP to set timer On or Off.
d). Refer the Data Setting Processes to adjust the Timer data.
1. Press ST/SP to change alarm settings (1 to 5).
Alarm mode
2. The ” “ symbol will display after alarm setup.
3. The alarm is a 30 seconds beep, the ” “ symbol will blink.
4. Stop the beep by pressing any key.
5. Take note of the time mode you have selected 12H or 24H.
6.
a). Press T.MODE to select “ALARM” mode.
Alarm setting:
b). Press SET for 2 seconds to enter alarm setting mode.
c). Press T.MODE or ST/SP to set timer On or Off.
d). Refer the Data Setting Processes
e). Press ST/SP to enter next alarm setting.
to adjust the Alarm data.
f). Repeat steps b-d to set the other alarm.
1. Calendar from the year 2000 to 2099.
Date mode
2. Day of week will display automatically while the date is input.
3.
a). Press T.MODE to select “DAT E ” mode.
Date setting:
b). Press SET for 2 seconds to enter data setting mode.
c). Refer the Data Setting Processes to adjust the Date data.
1. Press ST/SP to start/stop chronometer.
Chronometer mode
2. Press T.MODE for 2 seconds to reset chronometer data.
3. Maximum range is 99H59M59S.