Operation Manual

27

ALT Accumulated Altitude Gains (During a Trip)
1. With this function, it displays the accumulated altitude gains
during a trip.
2. When you ride over uphill paths, the altimeter will accumulate
the altitude gains. However, when you ride over downhill paths,
the computer will not deduct the altitude loss. The altimeter
always accumulates your altitude gains only.
3. Attention:
The altitude gains are accumulated during riding only.

MAX. ALT Maximum Altitude (During a Trip)
1. With this function, the computer displays the maximum altitude
you reach during a trip.
2.The max. altitude record will be cleared after you reset the
computer or change the battery.
SCAN Auto-Scan
1. To start this function, press the A button for times until the scan
icon is displayed.
2. When the SCAN icon is flashing, each function display in the
lower screen will be shown in a loop. In the loop, each function
will be displayed on the screen for 5 seconds.
3. You may disable the auto-scan function by pressing the A button again.
DST/D Distance/ Day
1. With the DST/D function, the computer accumulates the
distance of your riding in one day.
2. The DST/D data will be automatically cleared at 12:00:00 a.m.
(or 0:00:00) per day.
mBAR Millibar (Barometer)
1. The altimeter is essentially a barometer, and millibar is a unit of
atmospheric pressure.
(e.g. Standard atmospheric pressure at sea level is about 1013
millibars.)