Operation Manual

Description and Operation
www.echostar-int.com Page 2 - 9
© 2004 EchoStar International Corporation
All rights reserved
8. ADD/EDIT DATA, ADD/EDIT A TRANSPONDER OR CHANNEL
NOTE
You only need to add a transponder and/or channel if it is not available from the internal
database.
IF YOU WANT TO ADD A
TRANSPONDER:
1. Press the MENU key.
2. Select main menu 2.
3. Select Add/Edit data.
4. Press the OK key.
5. Press the  key.
6. Press the Green key.
7. Add the new transponder:
a. Enter the Frequency.
b. Enter the Symbol rate.
c. Enter the Polarity.
d. Enter the FEC (If known).
8. Press the MENU key twice.
9. Select main menu 1.
10. Select Program SAT.
11. Make sure, the signal
indicator shows a reading.
12. Press the Red key.
13. Select the required Search
mode (TP).
14. Press the OK key.
15. Press the Red key.
16. Wait for the Search channels
to complete.
I
F YOU WANT TO EDIT A
TRANSPONDER:
1. Press the MENU key.
2. Select main menu 2.
3. Select Add/Edit data.
4. Press the OK key.
5. Press the  key.
6. Press the Red key.
7. Select the required
transponder:
a. Enter the Frequency.
b. Enter the Symbol rate.
c. Enter the Polarity.
d. Enter the FEC (If known).
8. Press the MENU key twice.
9. Select main menu 1.
10. Select Program SAT.
11. Make sure, the signal
indicator shows a reading.
12. Press the Red key.
13. Select the required Search
mode (TP).
14. Press the OK key.
15. Press the Red key.
16. Wait for the Search channels
to complete.
I
F YOU WANT TO ADD/EDIT A
CHANNEL:
1. Press the MENU key.
2. Select main menu 1.
3. Select Advanced.
4. Press the OK key.
5. Select the required
transponder:
6. Set the new PIDs
(Enter also the leading 0):
a. Set the Video PID.
b. Set the Audio PID.
c. Set the PCR PID (If
known).
7. Press the Red key.
8. Note that the Channel added
popup shows momentarily.
9. Press the MENU key twice.
10. Select main menu 2.
11. Select Edit channel.
12. Press the Blue key.
13. Rename the channel.
- ; select
character;
- OK; enter character;
- Red; cancel rename;
- Green; backspace.
14. Press the MENU key.
Red - Edit TP; Green - Add TP.
Set the Audio PID and Video PID.
Rename the channel.