User guide

53
FAQs
If you can’t find a solution to a problem here, please visit
www.myechostar.com/support
No lights on HDS-600RS; it doesn’t switch on
- Check that the mains lead is plugged in to the power socket and the power socket
is switched ON.
- Try a different power socket.
- Try a different power lead or check the fuse.
No TV picture
- Check that the HDS-600RS is plugged in, switched on and has had sufficient time
to warm up.
- Make sure the HDS-600RS is not in Standby (you can bring the unit out of standby
by pressing the standby button on the front of the unit).
- Ensure the AV cable (either HDMI or SCART) is firmly connected to the unit and to
the TV.
- Ensure that the antenna cables are firmly connected to the unit and are in good
condition.
- Ensure that the TV is set up with the HDS-600RS and is not configured to receive
input from an external device such as a DVD Player.
- Check that the TV is switched on and that the brightness level is set correctly.
- Try changing channel: the selected channel may be off air.
No sound
- Ensure the AV cable (either HDMI or SCART) is firmly connected to the unit and to
the TV.
- Check the volume level of your TV or Audio/Theatre System (if connected).
- Check that the HDS-600RS, TV or Audio/Theatre System are not set to MUTE.
Poor picture or sound quality
- Ensure that the satellite dish is installed correctly (away from trees or other
obstacles) and is providing a good quality signal (see page 20).
- Picture quality may be temporarily affected by bad weather (heavy rain, snow).
Check the signal level coming from your dish (see page 20).
- If you have poor signal strength you may wish to consider changing the satellite
dish for a larger one as this will increase the signal levels received.
- Check the LNB for damage as moisture inside the LNB will affect signal strength