User guide

51
Power Options
Power-saving settings can be configured using this menu. Options allow you to
select the power consumption in standby mode.
Power Mode
Power saving mode
used when unit enters
standby:
Ultra low power mode
Lowest power consumption but the receiver will
take longer to switch to the active or ON state
(Sling features will not be available).
Normal low power mode*
In this mode, library functionality and Sling
features will be available.
Inactivity Standby
Define time period before the receiver goes into
standby if no remote control or front panel keys are
operated: Off, 4 Hours*, 5 Hours, 6 Hours
Technical Information
This menu displays software version and other technical information.
Tuning Preferences
Services
Choose the channel to be displayed when the HDS-
600RS is powered up.
Manual scan
Carry out a manual scan for services by setting Set
Frequency, Symbol Rate and LNB Polarisation
(advanced users only)
Regional channel
customisation
Choose different regional channels to those assigned
during setup.
Viewing Mode
freesat*
Non freesat
Factory Reset
Choose this option to restore the default configuration settings.
Note. In addition to removing all your personal settings, this will cancel any
scheduled recordings. Existing recordings are not affected and previously
saved content will not be deleted.