User guide

16
STEP 1: Enter your Postcode
1. Using the numbered buttons on the remote*, enter your postcode. The
HDS-600RS requires your postcode to be able to access your correct
regional programme listings.
2. If you make a mistake, press the RED button to delete the last character
you entered.
3. When you’ve entered a valid postcode, you’ll be prompted to press the
BLUE button to continue. Check that the postcode is correct before you do
so.
*This method of text input is called multi-tap: the same system used to enter
text messages on mobile phones. Each key represents 3 or 4 characters. For
example, the “2” key represents a, b, c and 2. To enter a b character, you
would press the “2” key twice. To enter a number 2, you would press the key
four times. If you need two successive characters that are on the same key,
enter the first one, then pause for a few seconds before entering the second
one. So, to type b2, you would press the “2” key twice, pause, and then press
the “2” key a further four times.