Operation Manual

Appendix
www.echostar-int.com Page A - 3
© 2004 EchoStar International Corporation
All rights reserved
4. PRE-PROGRAMMED LIST
The guided setup allows you to program the
receiver directly by language selection.
Once the pre-programmed channels are
loaded, you still can customize the settings
easily in the installation menu.
The Pre-programmed lists work only for a fixed
dish installation with or without a DiSEqC switch
with:
Universal LNBF, DiSEcQ port 1 = Astra1
Universal LNBF, DiSEcQ port 2 = Hotbird
Universal LNBF, DiSEcQ port 3 = Turk 1C
Universal LNBF, DiSEcQ port 4 = Nilesat
4.1. OFF
There is no pre-programmed list selected,
continue with the guided setup procedure.
4.2. DUTCH
This selection sets all primary language
selections to Dutch.
The known Dutch channels (Astra1) that were
available at production are loaded as the first
channels of the all channel list.
If you use a single dish, only the Astra1 signals
can be received.
4.3. GERMAN
This selection sets all primary language
selections to German.
The known German channels (Astra1, Hotbird)
that were available at production are loaded as
the first channels of the all channel list.
If you use a single dish, only the Astra1 signals
can be received.
4.4. FRENCH
This selection sets all primary language
selections to French.
The known French channels (Hotbird, Astra1)
that were available at production are loaded as
the first channels of the all channel list.
if you use a single dish, only the Hotbird signals
can be received.
4.5. ITALIAN
This selection sets all primary language
selections to Italian.
The known Italian channels (Hotbird) that were
available at production are loaded as the first
channels of the all channel list.
If you use a single dish, only the Hotbird signals
can be received.
4.6. TURKISH
This selection sets all primary language
selections to Turkish.
The known Turkish channels (Turk 1C) that
were available at production are loaded as the
first channels of the all channel list.
If you use a single dish, only the Turk 1C
signals can be received.
4.7. ARABIC
This selection sets all primary language
selections to Arabic.
The known Arabic channels (Nilesat) that were
available at production are loaded as the first
channels of the all channel list.
If you use a single dish, only the Nilesat signals
can be received.
QUICK REFERENCE GUIDE
Select the pre-programmed list.
Set the local time.
Select the DiSEqC port for the satellite.