Operation Manual

Description and Operation
Page 2 - 8 EchoStar International Corporation
© 2004 EchoStar International Corporation
All rights reserved
Red key - Add SAT, Green key - Edit SAT.
Red key - Add TP, Green key - Edit TP.
Red key - Add Channel, Green key - Edit
Channel (Video, Audio, PCR PID).
8. EDIT - ADD/EDIT SATELLITE, TRANSPONDER, CHANNEL (PID)
NOTE
You only need to add a satellite and/or transponder if it is not available from the internal
database. When you add a satellite, you have to identify at least one transponder. You only
need to change PIDs when your service provider changes the channel. A digital signal is
basically broken up in Video and Audio information which are synchronized with the PCR PID.
I
F YOU WANT TO ADD A NEW
SATELLITE:
1. Press the MENU key.
2. Select: Installation setup -
Edit
3. Press the Red key.
4. Enter the required SAT
name.
5. Press the Green key.
6. Set the orbital position:
Degrees and Location.
7. Set the first transponder:
Frequency, Polarity and
Symbol rate.
8. Leave the Channel as
unchanged.
9. Select Confirm.
10. For fixed installations:
Select System setup.
11. Allocate the SAT to a Port.
12. Press the MENU key.
13. Select Program SAT.
14. Select the required Search
mode.
15. Select confirm and press the
OK key.
16. Select Search channels and
press the OK key.
I
F YOU WANT TO ADD A
TRANSPONDER:
1. Press the key.
2. Select the required SAT.
3. Press the MENU key.
4. Select: Installation setup -
Edit
5. Select Frequency and press
the Red key.
6. Add the new transponder:
a. Set the Frequency and
press the OK key.
b. Set the Polarity.
c. Press the OK key to set
the Symbol rate.
7. Leave the Channel as
unchanged.
8. Make sure, the signal
indicator shows a reading.
9. Select Confirm.
10. Select Program SAT.
11. Select the required Search
mode.
12. Select Search channels and
press the OK key.
I
F YOU WANT TO ADD A CHANNEL:
1. Press the key.
2. Select the required SAT.
3. Press the MENU key.
4. Select: Installation setup -
Edit
5. Select the required TP:
Frequency, Polarity and
Symbol rate.
6. Select the channel.
Red: Add a channel
Green: Rename the channel
7. Set the new PIDs:
a. Press the OK key to set
the Video PID.
b. Press the OK key to set
the Audio PID.
c. Press the OK key to set
the PCR PID.
8. Make sure, the signal
indicator shows a reading.
9. Select Confirm.