Operation Manual

Description and Operation
Page 2 - 4 EchoStar International Corporation
© 2004 EchoStar International Corporation
All rights reserved
EPG - Yellow key - to select a timer.
Arrow keys - to set a timer.
Yellow key - to look up programmed timer.
4. TIMERS
CAUTION
The VCR timer does not start or program your video recorder (VCR). You have to set the timer
of your VCR also to the same time as on the receiver. Please refer to the user’s guide of your
VCR how to record from a satellite receiver.
I
F YOU WANT TO SET A TIMER
ONTO AN EPG EVENT:
1. Press the EPG key.
2. Select the EPG event.
3. Press the Yellow key.
4. If you want to record a
program onto the VCR,
select the VCR timer.
5. If you only want to wake up
the receiver, select the
Reminder.
6. Review the timer settings as
retrieved from the EPG
event.
7. If required, change the Date,
Start and Stop settings.
8. If required, change the
Interval into Once, Daily,
Weekly, Weekends or
Monthly.
9. Save settings.
10. Note that a clock shows in
the EPG event.
I
F YOU WANT TO SET A TIMER
WHEN THERE IS NO EPG:
1. Press the EPG key.
2. Press the Yellow key.
3. If you want to record a
program onto the VCR,
select the VCR timer.
4. If you only want to wake up
the receiver, select the
Reminder.
5. If required, change the Date.
6. Change the time:
a. Press the keys to
select Start or Stop.
b. Press the numerical or
 keys to set the
hours.
c. Press the OK key.
d. Press the numerical or
 keys to set the
minutes.
7. If required, change the
Interval into Once, Daily,
Weekly, Weekends or
Monthly.
8. Save settings.
I
F YOU WANT TO LOOK UP,
DELETE OR CHANGE A TIMER:
1. Press the EPG key.
2. Press the Yellow key.
3. Press the keys to select
the Timer list option.
Note that the Timer list only
shows if a timers is set.
4. Press the OK key to view the
Timer list.
5. Press the keys to select
the Timer. Note that the
timer details show.
6. Press the OK key to access
the Timer.
7. If you want to delete the
Timer, select Status: Delete.
8. Save settings.
9. Press the EXIT key.