Operation Manual

Getting Started
www.echostar-int.com Page 1 - 1
© 2004 EchoStar International Corporation
All rights reserved
GETTING STARTED
1. UNPACKING
1.1. TO UNPACK YOUR RECEIVER:
When you unpack the contents of the box,
confirm that all the parts are included.
Unpack the contents of the box carefully.
Electronic equipment as receivers are easily
damaged when you handle it roughly. Examine
all parts for damage that may have occurred
during shipment. If you find any damage, stop to
unpack the box and call the shop where you
bought the receiver.
To help avoid possible damage to the receiver’s
electronics, allow the receiver to adapt to the
ambient temperature and humidity level. This to
avoid condensation.
1.2. THE CONTENTS OF THE BOX
The box contains:
■ A receiver;
■ An UHF-cable;
■ A remote control unit (RCU);
■ A pair of batteries (for the RCU);
■ A set of documentation.
CAUTION
It is recommended to keep the packaging
materials for a period of time. In case of
warranty claims, we can request to return
the receiver in the original packaging to
protect the electronics. Failing to do so
might void the warranty.
WARNING
KEEP AWAY THE PLASTIC PACKAGING FROM
CHILDREN. THE PLASTIC PACKAGING MAY CLING
TO NOSE AND MOUTH AND PREVENT
BREATHING.
2. INSTALL YOUR RECEIVER
2.1. PROGRAM THE RECEIVER
This section assumes that the dish installation
is completed and operational and your receiver
is connected to your TV and other equipment
with suitable cables.
PRE-PROGRAMMED CHANNEL LIST
1. Switch the receiver to ON and wait for the
Languages menu to appear.
2. When in the Pre-programmed lists, select a
language and the related pre-programmed
channel list.
3. Make sure, the pre-programmed language
settings are convenient for you.
4. Select Continue and press the OK key.
5. Allow the receiver some time to load the
channel list and wait for the live video to
appear.
WARNING
ALL EQUIPMENT INVOLVED IN THE INSTALLATION
TASK MUST BE INSTALLED CORRECTLY AND
SWITCHED OFF. MAKE SURE THAT IT IS SAFE TO
PROCEED WITH THE INSTALLATION TASK.
U
NSAFE CIRCUITS AND INSTALLATIONS CAN
CAUSE (SERIOUS) INJURY OR DAMAGE TO
EQUIPMENT.
NOTE
Your receiver is pre-programmed for a fixed
dish installation with a universal LNBF. If you
have another dish installation (motorized),
additional settings are required.For detailed
information about the pre-programmed
channel lists and installation types, please
refer to the appendix.
QUICK REFERENCE GUIDE
Switch the receiver to ON.
Select your language / channel list.
Wait fo the live video to appear.