Operation Manual

Troubleshooting Section 7
Digital Satellite Receiver Page 7 - 1
© 2001 EchoStar International Corporation
All rights reserved
7
TROUBLESHOOTING
1. TO SOLVE A PROBLEM
1.1. GENERAL
1.2. EPG RELATED
1.3. TV AND RADIO RELATED
Problem Possible cause What to do?
1. Nothing appears on the
receiver display.
■ Main power cable is
damaged or not
connected.
■ Check the main power
cord and insert it in the
(wall) socket).
■ General domestic power
failure
■ Check the domestic
power supply and insert a
new fuse.
2. You have forgotten the
personal PIN-code.
■ Contact your dealer.
Problem Possible cause What to do?
1. The EPG is empty.
■ Youhaveselectedan
empty (favorites) list.
■ Select another (favorites)
list.
■ The selected program
supports no EPG.
■ There is no solution for
this.
■ The local time is not
correct.
■ In the Local Time menu,
set the correct time.
2. The EPG shows (little)
grey balloons without
text.
■ The time scale of the
EPG is to big.
■ Use the zoom function
(blue bar) to reduce the
time scale until the
information can be read.
■ Select the grey balloon
andontheRCU,press
theibuttontoviewand
read the information.
Problem Possible cause What to do?
1. No picture or sound in the
TV or radio mode.
■ Receiver is in standby. ■ Switch the receiver on.
■ Cable related problems. ■ Check the cable
connections and do any
necessary work.
■ Dish/LNB related
problems.
■ Make sure the dish and
LNB are correctly
adjusted. Do any
necessary work.
Downloaded from www.Manualslib.com manuals search engine