Operation Manual

Operation Section 5
Digital Satellite Receiver Page 5 - 5
© 2001 EchoStar International Corporation
All rights reserved
5
1.6.3. TO DELETE A CHANNEL
1.6.4. TO SET THE CHANNEL VOLUME OFFSET
1.6.5. TO RENAME A CHANNEL
1. In the Edit menu, select the DELETE option.
2. Read the available help text for information.
3. Go to the channel you want to delete.
4. On the RCU, press the OK key.
Note a red bullet appears behind the selection
and the cursor advances to the next channel.
5. If you want to undo the selection, press the
OK key again.
6. Either:
a. press the WHITE key to confirm the deletion
and end the session, or
b. select the next channel you want to delete.
1. In the Edit menu, select the VOLUME option.
2. Read the available help text for information.
3. Go to the channel you want to edit.
4. On the RCU, use the  keys to set the
volume.
5. Either:
a. Press the WHITE key to end the session, or
b. select the next channel you want to edit.
1. In the Edit menu, select the RENAME option.
2. Read the available help text for information.
3. Go to the channel you want to rename.
4. On the RCU, press the OK key.
Downloaded from www.Manualslib.com manuals search engine