User's Manual
Table Of Contents
- XiP813_COVER
- XiP813_GDE
- SAFETY
- Important Safety Instructions
- Proper Care of Your Equipment
- Important Safety Instructions
- 1. Read these instructions.
- 2. Keep these instructions.
- 3. Heed all warnings.
- 4. Follow all instructions.
- 5. Do not use this apparatus near water.
- 6. Clean only with a dry cloth.
- 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- 9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provi...
- 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- 11. Use only attachments/accessories specified by the manufacturer.
- 12. Unplug this apparatus during lightning storms or when unused for long periods of time.
- 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the app...
- 14. The power plug must be readily accessible so that the appartus can be easily disconnected from the AC power.
- Important Safety Instructions (continued)
- 15. The receiver is still connected to the AC power whenever it is plugged in to a live power outlet, even if it is turned off using the remote control or front panel buttons.
- 16. No flame sources, such as lit candles, should be placed on the equipment.
- 17. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- 18. Operate the receiver using only the type of power source indicated on the marking label. Unplug the receiver power cord by gripping the power plug, not the cord.
- 19. Do not overload wall outlets or extension cords; this can result in a risk of fire or electrical shock.
- 20. Never insert objects of any kind into the receiver through openings, as the objects may touch dangerous voltage points or short out parts. This could cause fire or electrical shock.
- 21. Do not locate the antenna near overhead light or power circuits, or where it can fall into such power lines or circuits. When installing the antenna, take extreme care to avoid tocuhing such power lines or circuits, as contact with them can be fatal
- 22. Do not attempt to service the receiver yourself, as opening or removing covers may expose you to dangerous voltage, and will void the Limited Warranty. Refer all servicing to authorized service personnel.
- 23. Unplug the receiver from the AC power outlet before cleaning.
- 24. Do not place the receiver in an enclosure such as a cabinet without proper ventilation.
- 25. Do not install the receiver in any area where the temperature can be less than 40°F or more than 113°F. If the receiver is cold to the touch, do not plug it in immediately. Let it sit unplugged at room temperature for at least 45 minutes before...
- 26. Do not expose the remote control batteries to excessive heat or fire.
- Important Safety Instructions (continued)
- 27. Use an outlet that contains surge protection or ground fault protection. During an electrical storm or when the receiver is left unattended and unused for long periods of time, unplug the power cord from the wall outlet, disconnect the lines betw...
- 28. Tighten all the coaxial cable connections only by hand. If you use a wrench, you may overtighten the connections and damage the equipment.
- Proper Care of Your Equipment
- Appendix
- Limited Warranty
- Residential Customer Agreement
- Agreement on Internet Usage via Your Receiver
- FCC Compliance
- Limited Warranty
- What the Warranty Covers
- What the Warranty Does Not Cover
- If You Need Assistance
- Legal Limitations
- If You Need Assistance
- 1. Call the Customer Service Center at 1-800-333-DISH (3474). Have the date of purchase and either your customer account number, the receiver conditional access number, or the receiver model number ready. Display the System Info menu to find these nu...
- 2. A Customer Service Representative will assist you.
- 3. If the Representative determines you should return any equipment, you will be directed to call a Return Authorization representative. Before shipping any equipment, you must talk to a Return Authorization representative and must obtain a Return Au...
- 4. You will be given the appropriate address for which to return your equipment. Whether under warranty or not, you will be responsible for the cost of shipping back the defective equipment. For faster service, see the Advance Exchange Program below.
- 5. Returned equipment must be packaged properly, using either the original shipping materials or the packaging in which the replacement equipment is shipped. Include a copy of the Bill of Sale. Any items returned without a copy of the Proof of Purcha...
- 6. Write the RA number in large, clearly visible characters on the outside of the shipping box that you use to return the equipment. To avoid confusion and misunderstandings, shipments without an RA number clearly visible on the outside of the box wi...
- DISH Network’s Exchange Program
- Advance Exchange Program
- Post Receipt Exchange Program
- Accessory Warranty
- Residential Customer Agreement
- FCC Compliance
- SAFETY
Residential Customer Agree-
27
H. Software License. You are licensed to use the software provided in your DISH Network
receiver(s), as updated by DISH Network, its licensors and/or its suppliers from time to time,
solely in executable code form, solely in conjunction with lawful operation of the DISH Network
receiver(s) that you purchased or leased, and solely for the purposes permitted under this
Agreement. You may not copy, modify or transfer any software provided in your DISH Network
receiver(s), or any copy of such software, in whole or in part. You may not reverse-engineer,
disassemble, decompile or translate such software, or otherwise attempt to derive its source
code, except to the extent allowed under any applicable laws. You may not rent, lease, load,
resell for profit or distribute any software provided in your DISH Network receiver(s), or any part
thereof. Such software is licensed, not sold, to you for use only under the terms and conditions
of this license, and DISH Network, its licensors and its suppliers reserve all rights not expressly
granted to you. Except as stated above, this license does not grant to you any intellectual
property rights in the software provided in your DISH Network receiver(s). Any attempt to
transfer any of the rights, duties or obligations of this license is null and void. If you breach any
term or condition of this license, this license will automatically terminate.
I.
Stolen Equipment. . If any of your Equipment is stolen or otherwise removed from your
premises without your authorization, you must notify our customer service center by telephone
or in writing immediately, but in any event not later than three (3) business days after such
removal, to avoid liability for payment for unauthorized use of your Equipment. You will not be
liable for unauthorized use that occurs after we have received your notification.
5. LEASED EQUIPMENT
A.
Lease Terms. We may choose to lease certain Equipment to subscribers. Unless otherwise
specified in an applicable Promotion Agreement(s), such Equipment (including without limitation,
the LNBFs, but not the satellite antenna), shall at all times remain the sole and exclusive
property of DISH Network, and we may provide or replace leased Equipment with new or
reconditioned Equipment at any time, and upon cancellation or disconnection of your Services,
remove or require the return of such Equipment. No leased Equipment provided to you by DISH
Network shall be deemed fixtures or part of your real property. We may make such filings and
recordings that we may consider necessary to evidence our ownership rights in such Equipment,
and you agree to execute any and all documents that we may consider necessary for us to make
such filings. Our ownership of such Equipment may be displayed by notice contained on it. You
have no right at any time to pledge, sell, mortgage, otherwise encumber, give away, remove,
relocate, alter or tamper with such Equipment, or to tamper with or alter any notice of our
ownership on such Equipment. Any reinstallation, return, or change in the location of such
Equipment must be performed by DISH Network at our then-current service rates. You shall not
attach any electrical or other devices to, or in any way alter, any such Equipment without our
prior written consent. You are responsible for preventing the loss or destruction of leased
Equipment and we recommend that such Equipment be covered by your homeowners, renters
or other insurance policy.
B.
Return of Leased Equipment. Upon cancellation or disconnection of your Services, you must
contact our customer service center or call the telephone number set forth in any applicable
Promotion Agreement to schedule the return of your leased Equipment. If you do not return such
Equipment undamaged and in working order, normal wear and tear excepted, you are
responsible and must pay us certain charges as described in any applicable Promotion
Agreement.
C.
Defects and Damages. You must notify us immediately of any defect in, damage to, or
accident involving your leased Equipment. All maintenance and repair of such Equipment must
be performed by us or our designee(s). DISH Network may charge you for any repairs that are
necessitated by any damage to, or misuse of, such Equipment.
6. TRANSFER OF ACCOUNT, SERVICES OR EQUIPMENT
DISH Network may sell, assign or transfer your account to a third party without notifying you. You
may not assign or transfer your Services without our written consent, which will not be