User's Manual
Table Of Contents
- XiP813_COVER
- XiP813_GDE
- SAFETY
- Important Safety Instructions
- Proper Care of Your Equipment
- Important Safety Instructions
- 1. Read these instructions.
- 2. Keep these instructions.
- 3. Heed all warnings.
- 4. Follow all instructions.
- 5. Do not use this apparatus near water.
- 6. Clean only with a dry cloth.
- 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
- 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- 9. Do not defeat the safety purpose of the polarized or grounding- type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provi...
- 10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
- 11. Use only attachments/accessories specified by the manufacturer.
- 12. Unplug this apparatus during lightning storms or when unused for long periods of time.
- 13. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the app...
- 14. The power plug must be readily accessible so that the appartus can be easily disconnected from the AC power.
- Important Safety Instructions (continued)
- 15. The receiver is still connected to the AC power whenever it is plugged in to a live power outlet, even if it is turned off using the remote control or front panel buttons.
- 16. No flame sources, such as lit candles, should be placed on the equipment.
- 17. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
- 18. Operate the receiver using only the type of power source indicated on the marking label. Unplug the receiver power cord by gripping the power plug, not the cord.
- 19. Do not overload wall outlets or extension cords; this can result in a risk of fire or electrical shock.
- 20. Never insert objects of any kind into the receiver through openings, as the objects may touch dangerous voltage points or short out parts. This could cause fire or electrical shock.
- 21. Do not locate the antenna near overhead light or power circuits, or where it can fall into such power lines or circuits. When installing the antenna, take extreme care to avoid tocuhing such power lines or circuits, as contact with them can be fatal
- 22. Do not attempt to service the receiver yourself, as opening or removing covers may expose you to dangerous voltage, and will void the Limited Warranty. Refer all servicing to authorized service personnel.
- 23. Unplug the receiver from the AC power outlet before cleaning.
- 24. Do not place the receiver in an enclosure such as a cabinet without proper ventilation.
- 25. Do not install the receiver in any area where the temperature can be less than 40°F or more than 113°F. If the receiver is cold to the touch, do not plug it in immediately. Let it sit unplugged at room temperature for at least 45 minutes before...
- 26. Do not expose the remote control batteries to excessive heat or fire.
- Important Safety Instructions (continued)
- 27. Use an outlet that contains surge protection or ground fault protection. During an electrical storm or when the receiver is left unattended and unused for long periods of time, unplug the power cord from the wall outlet, disconnect the lines betw...
- 28. Tighten all the coaxial cable connections only by hand. If you use a wrench, you may overtighten the connections and damage the equipment.
- Proper Care of Your Equipment
- Appendix
- Limited Warranty
- Residential Customer Agreement
- Agreement on Internet Usage via Your Receiver
- FCC Compliance
- Limited Warranty
- What the Warranty Covers
- What the Warranty Does Not Cover
- If You Need Assistance
- Legal Limitations
- If You Need Assistance
- 1. Call the Customer Service Center at 1-800-333-DISH (3474). Have the date of purchase and either your customer account number, the receiver conditional access number, or the receiver model number ready. Display the System Info menu to find these nu...
- 2. A Customer Service Representative will assist you.
- 3. If the Representative determines you should return any equipment, you will be directed to call a Return Authorization representative. Before shipping any equipment, you must talk to a Return Authorization representative and must obtain a Return Au...
- 4. You will be given the appropriate address for which to return your equipment. Whether under warranty or not, you will be responsible for the cost of shipping back the defective equipment. For faster service, see the Advance Exchange Program below.
- 5. Returned equipment must be packaged properly, using either the original shipping materials or the packaging in which the replacement equipment is shipped. Include a copy of the Bill of Sale. Any items returned without a copy of the Proof of Purcha...
- 6. Write the RA number in large, clearly visible characters on the outside of the shipping box that you use to return the equipment. To avoid confusion and misunderstandings, shipments without an RA number clearly visible on the outside of the box wi...
- DISH Network’s Exchange Program
- Advance Exchange Program
- Post Receipt Exchange Program
- Accessory Warranty
- Residential Customer Agreement
- FCC Compliance
- SAFETY
Appendix
18
DISH Network’s Exchange Program
DISH Network offers two options if you need to replace your satellite receiver equipment or its
accessories.
Advance Exchange Program
The Advance Exchange Program allows you to have replacement equipment shipped
immediately to you (depending upon where you live, it could take three to five business days).
Along with replacement equipment, you will receive a prepaid shipping label and instructions on
how to return the defective equipment. The shipping charge, for receiving replacement
equipment and returning the defective equipment, is a one-time fee based on DISH Network's
competitive bulk shipping rates (additional charges may apply outside of the continental US).
This fee will be charged to your billing account or your valid credit card. If you do not ship the
defective equipment to DISH Network within ten days after receiving the replacement, your
billing account or credit card will be charged the market price of the replacement. If you return
the defective equipment after ten days, you will receive a full refund less an administrative fee.
If your equipment is out of warranty and can be repaired your billing account or credit card will be
charged the standard repair fee for the replacement. If damage to the defective equipment is
found, which DISH Network in its sole discretion determines has voided the warranty, or makes
the equipment unrepairable, billing account or credit card will be charged the market price of the
replacement.
Post Receipt Exchange Program
You may choose to ship the equipment to us at your cost. To provide faster service, upon receipt
of your equipment you will be shipped a replacement. Your original equipment will not be
available for return.
The equipment you return will be checked to verify whether it is covered under this warranty. If
the defective equipment is covered under this warranty, it will be replaced and shipped back to
you at no additional cost (additional charges may apply outside of the continental US).
If your equipment is out of warranty and can be repaired your billing account or credit card will be
charged the standard repair fee for the replacement. If damage to the defective equipment is
found, which DISH Network in its sole discretion determines has voided the warranty, or makes
the equipment unrepairable, your billing account or credit card will be charged the market price
of the replacement.
Accessory Warranty
An accessory is any DISH Network branded equipment, displaying the DISH Network logo,
excluding the receiver, cables and hookups, and non-mechanical components. A one-year
warranty becomes effective upon the activation of the DISH system or date of purchase, if
bought separately. A proof of purchase is required to verify the purchase date. If an accessory
has an expired warranty, no exchange will be issued. You may purchase replacement
accessories from DISH Network or your local retailer.